HERMLE C40U DYNAMIC SUPER PRECISION 5-AXIS VERTICAL

GENERAL SPECIFICATIONS:
Working Area:
Traverse X-Axis 850 mm
Traverse Y-Axis 700 mm
Traverse Z-Axis 500 mm
Linear rapid traverse X-Y-Z 45 m/min
Linear acceleration X-Y-Z 6 m/s
Linear feed force X-Y-Z 7000 N
Linear rapid travers (dynamic) X-Y-Z 60 m/min
Acceleration (dynamic) X-Y-Z 10 m/s
Feed force (dynamic) X-Y-Z 8,500 N
Main Spindle Drive:
Speed SK 40/HSk A63
Main Power/Torque 15 kW/130 Nm
Control Unit:
Heidenhein iTNC 530
Tool Changer:
Magazine pockets 38
Chip to Chip time approx. 5.5 sec.
Chip to Chip time (dynamic) approx. 4.5 sec.
Max. tool length 300 mm
Max. tool diameter 90 mm
Max. tool diam w/corresponding adjacent pocket 125 mm
Max. magazine load @ 38 units 152 kg
Main Connection 400V/50 Hz
Power consumption 43 kVA
Compressor Air 6 bar
Machine dimensions approx. (Width & Depth) 2350mm x 3150mm
Machine height 2900 mm
Machine weight (approx) 9.5 Tons
Table Variants:
NC-Controlled Swiveling Rotary table 420 deg
Clamping surface 420 mm
Swivel range +91/-139 deg
Type of drive Torque
Speed-Swiveling Axis A 55 RPM
Speed Rotary Axis C 65 RPM
Max. Table load 450 kg
T-grooves parallel 5/147H7
Adjacent clamping plates 960x553 mm
T-grooves parallel 8/14 H7
NC-Controlled swiveling Rigid
Rotary Table Clamping
Clamping surface 1,070 x 700 mm
Max. Table load 2,000 kg
T Grooves Parallel 10/14H7
NC Indexing device 200/315 mm deg.
Position measuring system direct resolution 0.0001 mm
Volume of coolant 350
Through the spindle coolant supply w/paper filter:
Amount of coolant 1,000
Pressure infinitely variable manual Max. 80 bar/20/min
Mains connection 400 V/50Hz
Power consumption 17 kVA
Hydraulic system Operating pressure 120 bar