MICROMATIC MODEL 1 HR MICROHONER BEARING RACEWAY M

GENERAL SPECIFICATIONS:

Part O.D. - Maximum 4.500" (114MN)
Part Width - Maximum
Inner Rings 1.562" (39.6MM)
Outer Rings 1.750" (44.45MM)
Track Width
Minimum .060" (1.52MM)
Maximum (Inner rings) .562" (14.27MM)
Maximum (Outer rings) .750" (19.05MM)
Centerline of Oscillation
Above spindle centerline Maximum 3" (76.2MM)
Below spindle centerline Max. 1.812 (46.02MM)
Base Height 36 1/2" (927MM)
Overall H x W x L 54" x 31" x 52 - 3/4"
(1371 x 787 x 1339MM)
Net Weight 3100# (1395 Kg)
Spindle Motor 3/4 HP - 1800 RPM
Oscillation Motor 1/3 HP - 350 RPM
NOTE Engineering charges for specific tooling
Inner Rings Outer Rings
Driver $ 85.00 $ 100.00
Stone Adaptor 95.00 150.00
Bearing Support 115.00 150.00
Locating arbor 115.00 ----
L.O. Drawing 265.00 275.00
Total 675.00 675.00
1 1/2" O.D. carbide S.A. for Inner Rings $ 705.00
NOTE
The XLO Micromatic Model 1HR single spindle Microhoner is designed
primarily to Microhone both inner and outer raceways of ball
bearings, and other parts with annular grooves. The 1HR features
shoe centerless and roller pressure centerless types of workpiece
fixturing. This feature provides a more accurate bore to raceway
concentricity and faster cycle time than possible on any other
available type of raceway finishing equipment.