HARDINGE CHNC-I CNC TURNING MACHINE

Spindle configuration ANSI A2-5"
Hole through spindle 1.875"
16C collet capacity 1-5/8"
Spindle speed range (1-RPM steps) 50 to 5000 RPM
AC spindle drive (30 minute rating) 10 HP
Capacity
Maximum swing over bed 14"
Maximum threading diameter 8"
Maximum turning diameter 8"
Maximum fixture diameter 9"
Maximum allowable weight on spindle 75 lbs
(including workholding device)
Turret
Number of stations 8
Square tool size (standard) 1/2
Round tool diameter (standard) up to 3/4"
Maximum X-axis travel 4.5"
Maximum Z-axis travel 12"
Maximum X-axis traverse rate 400 IPM
Maximum Z-axis traverse rate 400 IPM
Maximum distance from turret face to spindle 12.5"
Indexing time (station 1 to 8) 2 seconds
Indexing time (station to station) 1 second
Miscellaneous
Least input increment .00010
Least command increment .00010
Compress air requirement 70 min to 90 max. PSI
5 to 6 SCFM
Max. recommended ambient operating temp 113 degree F
Coolant sump capacity 30 US gallons
Approx. skidded weight 6000 lbs
Machine deminsions 91.5" x 65" x 66"H
Height with guard door raised 89.75"

MOTOR SPECIFICATIONS

230 volts, 3 phase