FADAL VMC 4020 4 AXIS CNC VERTICAL MACHINING CENTER

Table size 48" x 20"
Floor to table surface 32"
T-slots (no. X width X span) 5 x .687" x 3.75"
Cutting feed rate (X/Y/Z) .01-400 ipm
(600" at 150%)
Rapid feed rate (X/Y/Z) 900 ipm (X/Y)
700 ipm (Z)
Max. weight on table 3,641 lbs
Axis drive motor (X/Y/Z) AC, 3,800 lbs thrust
Ball screw size 40 mm dia (X/Y/Z)
Longitudianl (X axis) 40"
Cross (Y axis) 20"
Vertical (Z axis) 20"
Spindle nose to table 4" - 24"
Spindle center to column ways 20"
Main motor - automatic 2 speed Vector drive 22.5 HP
Torque 220 ft - lbs.
Accuracy, axis positioning +/- .0002"
Accuracy, axis repeatability +/- .0001"
Glass scales (X, Y, Z) Optional
Spindle speed 10-10,000 RPM
Spindle orientation Electromechanical
Spindle taper No. 40
ATC, number of tools 21
ATC, tool selection Random/Bi-directional
Max. tool diameter 3"
(without adjacent tools) 6" (4.5" w/30 tools)
Max. tool length 15"
Max. tool weight 15 lbs

(cont.)
Machine width x depth 116" W x 87" D
Machine maximum height 104" H
Machine weight 10,500 lbs
Air pressure requirement (Momentary) 80 PSI, 15 SCFM
Power requirement (3-phase) 40/45 Amps
230 VAC (20/25, 480)
Machine run time
Power on 5,380 hours
Run 1,047 hours

MOTOR SPECIFICATIONS

220/440 Volt, 3 Phase / Wired 220 Volt
22.5 HP high torque 2-speed Vector drive