GIDDINGS & LEWIS MODEL MC-50SP 5-AXIS CNC HORIZONTAL

Spindle diameter 5"
Spindle taper #50 A
NS
NOTE Machine to be prepared to accept ANSI B5.50
short shank tooling with retention knobs
Spindle travel 36"
Planer table size 60" x
96"
Table travel 60"
Headstock travel 92"
NOTE Requires 96" column
Column travel on runway 60"
Workchanger - Pallet handling system
Machine arranged to accept workclanger
system with 36" square pallets with 46" cropped corners
Basic rotary stand located in front of planer table
including power connections, machine interface and operator station
for manual cycling.
NOTE 1 Automatic cycling of pallets from machine control system
NOTE 2 Stand to have limit switch for vehicles and pallet detection
CONTROL SYSTEM
Numeripath CNC 8000-M control
(Spec.No. CNC 8003/4-M 3-1-84 HBM)
"x, y and w/z" axes
Pedestal
Air-to-air heat exchanger
Interface and plug for numeriprobe printer
Additional 192K approximately 3,000 part program storage
ACCESSORIES
Contouring/tilt HPM rotary table mounted on slide to accept 36" pallets
NOTE 1 The rotary table will be the "B" axis and tilt will be the "A"
Axis
NOTE 2 95 Degrees tilt forward and 15 degrees backward
NOTE 3 Table load capacity 3,000 lbs (Pallet, part and fixture)
Plain packaging stand
Automatic stand-alone tool changer with 80 tool capacity
STANDARD FEATURES
Power drawbar (collet type)
Electric servo drives
Non-metallic way liners on "Y" and "W" axes
Planer table to base joint ("X" axis) is hydrostatic
Cont. on
Stock
Ball screws on "Y", "W" and "Z" axes
Bijur lubrication
Replaceable hardened ways on column cross slide (runway)
Way covers on table and column cross slide (front and rear)
OPTIONAL EQUIPMENT
Rotational spindle clamp
Hardened column ways
High speed traverse X & Y axes (300 IPM)
High speed traverse W & Z axes (200 IPM)
Special high speed (3000 RPM) spindle
Numeriprobe - In-process Gauging-Standard Package-360 deg.optical(amada
#3)
Lubri-Cool
Air thru-the-spindle
Flood coolant with central system hookup and pump
Mist coolant
Chip conveyor
Chip containment enclosures
Machine mounted status indicating bcacon
Tool verifier
Work light

MOTOR SPECIFICATIONS

40 HP DC Spindle drive motor (MTDC) (G.E. Drive and motor)
Power supply 460/3/60 Hertz