PROCECO TYPHOON MODEL SI-2 STAINLESS STEEL BATCH TYPE

GENERAL SPECIFICATIONS:

The Proceco Typhoon SI is engineered for a multitude of tough-to-clean pa
rts with
with complex geometrics and intricate bores. The innovative design rotat
es
the parts in a high turbulation enviornment created by both power spray a
nd
immerson, to release trapped contaminants resulting in clean parts. To
complete the process, rotation coupled with a high-pressure heated air st
ream
throughly drains and dries the parts.
Its compact footprint and ergonomic design make the Typhoon SI ideally su
ited
for operation in a lean manufacturing environment. Standard sizes accomm
odate
virtually any size workload, whether your parts fit in standard Kadon Bas
kets
or require custom fixtures. As always, Proceco offers your peace-of-mind
with
our commitment to building quality, low-maintenance, robust equipment.
Features
Power spray, immersion, wash and rinse cycle
Polished stainless steel 304 construction
Ergonomic design
High-pressure regenerative blow-off
Minimal cabinet wetted surface area
Chip basket accessible theough hinged covers
Service connections and equipment located at rear
Programmable logic controller
HMI displays machine status and fault warnings
Digital indicating temperature controllers
Optional special fixtures
Optional network communication
Optional oil coalescers and skimmers
Optional inspection window and light
Optional ultrasonics
Load
Maximum workpiece size 44"L x 18"W x 8"H
Maximum workpiece weight 300 LBS
Loading height (from floor) 36"
Cont. on
GENERAL SPECIFICATIONS:

1st Stage (Wash)
Pump capacity 115 USgpm @ 60 psi
Pump motor 7.5 HP, 3600 RPM
TEFC
Tank capacity 260 USgal
Heating capacity 24kW
2nd Stage (Rinse)
Pump capacity 80 USgpm @ 30 psi
Pump motor 3 HP, 3600 RPM TEFC
Tank capacity 180 USgal
Heating capacity 12 kW
3rd Stage (Fresh Water Rinse)
Plant water supply 40 PSI required
4th Stage (Regen Blow-Off, Heated)
Blower capacity 300 SCFM @ 70" w.c.
Blower motor 7.5 HP, 3600 RPM
TEFC
Temperature, maximum 225 deg. F
General
Max. solution operating temp. 160 deg. F
Heat up time (70 deg. F T) 2.5 HRS
Exhaust blower capacity 650 SCFM @ 3/4" w.c.
Blower motor 1/3 HP, 3600 RPM
Rotator drive gearmotor 1/4 HP
Max. noise level (at 1 meter) 80 DBA, T.W.A.
Compressed air required 5 SCFM @ 80-120 psi
Power requirements 110 A @ 230 V/3
PH/60 Hz
Approx. shipping weight 5,500 LBS
**NOTE New Price Approx. $110,000.00