BROWN & SHARPE #00 R/S SINGLE SPINDLE AUTOMATIC SCREW

Spindle capacity 1/2"
Turns any length to
at 120 RPM driveshaft speed 1 1/2"
at 240 RPM driveshaft speed 1"
Spindle hole diameter 11/16"
Spindle speeds
Total sped range 34 to 8665 RPM
Number of high speeds 18
High speed range 542 to 8665 RPM
Maximum speed with reversal 7188 RPM
Number of second speeds 15
Drive shaft
Runs at constant speed of 120 or 240 RPM
Drive sleeve
Runs at constant speed of 120 or 240 RPM
Production rates
No. of rates for each driveshaft speed 60
Time required to produce one piece per cycle
with 240 RPM driveshaft speed 3/4 to 50 Seconds
with 120 RPM driveshaft speed 1 1/2 to 100 Seconds
Minimum cycle with reversal 3 Seconds
Stock feeding mechanism
Maximum feed length setting
with 240 RPM drive sleeve speed 1"
with 120 RPM drive sleeve speed 2"
Time required for feeding cycle
with 240 RPM drive sleeve speed 1/4 Seconds
with 120 RPM drive sleeve speed 1/2 Seconds
Cont. on

Turret
Diameter .6 Hole 3 3/8"
Diameter of tool holes 5/8"
Upper slide rear
Longitudinal adjustment 1"
Cross slides
Maximum travel 1 1/8"
Screw adjustment 1/2"
Lubrication - Automatic
Capacity - Auto. lubrication reservoir 2 3/4 Gallons
Base reservoir 4 Gallons
Coolant system
Capacity of reservoir 9 Gallons
Overall dimensions 83"L x 45"W x 79"H
Weight (approx.) 3,150 LBS

MOTOR SPECIFICATIONS

3 HP Spindle motor