26" X 120" CINCINNATI HYDRASHIFT TOOLROOM ENGINE LATHE

Capacity
Swing over bed 26 3/4"
Swing over cross slide 17 1/2"
Distance between centers (max.turning length) 48 To 216
Swing over bed, raised models - raised / swing
3 32 1/4"
4 34 1/4"
5 36"
Spindle speeds, number 12
Spindle speed range - High 24 To 960 RPM
Spindle reverse Electriacal
Tailstock
Spindle nose - Standard long taper key drive L-2
Spindle - diameter of hole thru - L series only 2 5/16"
Spindle - size of center #5 Morse
Bed
Width 18 7/8"
Depth 14 11/16"
Thread and feed range
Number of thread and feed changes 54"
Range of threads per inch, low, standard and
high speed ranges 1 1/2 To 92
Range of feeds - carriage, low, standard and
high speed ranges .0019 To .1215 IPR
Range of feeds, cross slide, low, standard and
high speed ranges .0019 To .0578 IPR
Leadscrew (Acme) diameter in inches and threads
per inch 1 5/8" - 4"
Carriage and Compound Test
Cross slide travel 16 3/4"
Top slide travel 4 1/2"
Tool holders - size of tool shank, inches and # 3/4 x 1 5/8" (#3)
Carriage bearing on ways 27"
Width of bridge 9"
Cont. on

Tailstock
Spindle travel 6
Spindle diameter 2 3/4"
Spindle - Size of center #5 Morse
Tailstock setover, eith side of center 1"
Taper attachment
Max.taper per foot 4 1/2"
Max. turning length at one setting 20"
Max. included angle 20 Deg.
Misc.
Face plate - large and standard 25 1/2" & 13 3/4"
Steady rest, standard capacity - min. and max.
diameter 1/2" To 8"
Steady rest, oversize capacity - min. and max.
diameter 7 1/2" To 15"
Follow rest capacity - Min. and max. diameter 3/4" To 5"
Basic machine size 26" x 48"

MOTOR SPECIFICATIONS

Motor - Standard, high or super high spindle
speed range 10 HP