FADAL CNC TOOL ROOM MILL

Computer Numerical Machine Motion Control
The TRM features an easy to use, powerful Fadal Multi-Processor CNC
for generation and execution of CNC part programs. A handful of the
many standard Fadal CNC features are listed below
Menu prompting
Displays all machine functions in English and walks the user through
the setup process from start to finish.
Modal Sub Routines
Create customized fixed cycles, create a custom drill cycle, bore
cycle, pocketing routine or any other type of routine.
MACRO Language
This standard feature allows simple generation of customized programs.
Quick Keys
Once familiar with the easy to learn Fadal MP CNC utilize quick keys
to speed the process of part programming.
Engraving
Indentify an individual part of serialize a series of parts with Fadal's
standard, single line of code, CNc engraving function.
Large X/Y/Z Position Read Out Displays
Easily determine your X/Y/Z part position by glancing up to the large
position readout.
Manual Machine Motion Control
The TRM features a manual pulse generator for each axis, X/Y/Z, for
control of machine motion. Position increments can be set to 0.010",
0.001" or 0.0001"
Cont. on

(cont.)
Changing Tools
A conveniently positioned tool in/out button is provided for quick and
easy tool changing.
Chip Clean-Up
An easily removable chip tray is positioned below the TRM table and
base to allow effective removal of chips that are produced during
cutting operations.
Table size 35" x 12"
Floor to table surface 34.5"
T-Slots (No. x width x span) 3 x .562" x 4.375"
Cutting feed rate (X/Y/Z) .01 - 200 ipm
Rapid travel rate (X/Y/Z) 200 ipm
Max. weight on table 500 LBS
Axis drive motor (X/Y/Z) AC, 1,200 LBS Thrust
Ball screw size 32 mm Dia. (X/Y/Z)
Longitudinal (X Axis) 30"
Latitudinal (Y Axis) 14"
Vertical (Z Axis) 14"
Spindle nose to table 4" - 18"
Spindle center to column ways 19"
Main motor - Spindle horse power 5 HP
Spindle torque 28 FT-LBS
Accuracy, axis positioning +/- .0004"
Accuracy, axis repeatability +/- .0002"
Spindle speed 4,000 RPM
Spindle taper No. 40
Max. Tool diameter 4.5"
Max. tool length 10"
Max. tool weight 15 LBS
Machine dimensions 86" x 55" x 86"L
Machine weight 4,000 LBS
Cont. on page 3
Page 3 of 3

MOTOR SPECIFICATIONS

230 Volt 3 Phase
15 Full load amps