29.5" X 16" FADAL EMC CNC VERTICAL MACHINING CENTER

Table size 29.5" x 16"
Floor to table surface 33.25"
T-slots (no. x width x span) 3 x .709" x 4.33"
Cutting feed rate (X/Y/Z) .01 - 250 ipm
375 # 150%
Rapid travel rate (X/Y/Z) 700 (X/Y) ipm
600 (Z) ipm
Max. weight on table 1,000 lbs
Axis drive motor (X/Y/Z) AC, 2,500 lbs. * thrust
Ball screw size 32 mm dia. (X/Y/Z)
Longitudinal (X axis) 20"
Latitudinal (Y axis) 16"
Vertical (Z axis) 14"
Spindle nose to table 4" - 18"
Spindle center to column ways 17"
Main motor - spindle horse power 7,5 HP
Spindle torque 36 ft-lbs
Accuracy - axis positioning +/- .0002"
Accuracy - axis repeatability +/- .0001"
Spindle speed 7,500 RPM
Spindle orientation Electromechanical
Spindle taper No. 40 CAT
ATC, number of tools 16
ATC, tool selection Random/Bi-directional
Max. tool diameter 3"
(without adjacent tools) 4.5"
Max. tool length 10"
Max. tool weight 15 lbs
Machine width x depth 77" x 75"
Machine maximum height 116"
Air pressure requirement (momentary) 80 - 120 PSI
15 SCFM

MOTOR SPECIFICATIONS

230 volt, 3 phase
24 full load amps
7.5/5 HP