6"MITSUBISHI MODEL MAF-RS150B-NC RAM TYPE,FLOOR TYPE BORING

Spindle
Milling spindle diameter 8.26"
Boring spindle diameter 5.90"
Boring spindle nose taper No.50, Taper 7/24
Boring spindle and ramstock feeding thrust 6,600 lbs
Spindle speeds (Inf.var. in 3 steps) 8 - 1,800 RPM
Number of speeds Direct RPM
programming
Output of spindle motor 40/50 HP
Travel
Column, horizontal 236.22"
Saddle, vertical 118.11"
Ramstock in/out 27.56"
Boring spindle, in/out 35.43"
Total axial travel 62.99"
Feed Rates (inf. Var.)
X, Y, Z, and W Axes 0.04 to 157 ipm
Rapid Traverse
X and Y axes 394 ipm
Z and W axes 197 ipm
Scope of Supply
Steel telescopic way covers on bed
Total protector for ramstock vertical movement
Hydro-mechanical slideway clamps of X, Y and Z axes
Non-ferrous materials on mating surfaces of the slideways of X, Y and Z
axes
Hydro-static slideway bearings on X, Y and Z axes
Power tool lock/eject on boring spindle
Spindle orientation
Spindle air blow
Work light
Warning light on top of the machine
Levelling blocks with sherical seat
Inductosyn feedback for X, Y and Z axes and resolver feedback for W axis
Automatic ramstock gravitational center compensator
Cont. on
Mitsubishi Rotary Table with APC controlled from the MAF machine
Model DIT-AH 21 x 30-APC

Pallet size 83 x 118"
Loading capacity 44,000 LBS
Cross travel NC "V" 59.05"
Table index Any angle by inducto
syn
Feedrates (Inf. Var.)
Table In/Out 0.04 to 157 ipm
Rapid traverse
Table in/out 197 ipm
Table rotation 250 deg/min
Table feeding thrust 6,600 LBS
Scope of Supply
Steel telescopic way covers on bed
Hydro-mechanical clamps for cross travel and rotation slideways
Hydro-static slideway bearings on cross travel and rotation slideways
Leveling blocks with spherical seat
Inductosyn feedback for V axis and for table index
Options
Chip conveyor to cover 17 meters of horizontal travel, elevating-type
Flood coolant supply system with provision for thru the spindle
Powered pendant control box (up/down movement)
Independant operator's platform
Automatic tool changer (ATC) with 80-tool magazine
Automatic attachment clamping system with automatic indexing at every 90
deg.
Dummply plate for ramstock
(2)Right-angle head RH-15LS with support S-560-RS15B-01-AC( one should h
ave same
cutting capacity of RH-15M)
Attachment storage rack for three attachments with protection cover
Automatic tool changer for attachment 60-tool
Lubricating oil cooling device
Accuracy monitor (automatic measuring by probe tool)
(a) Automatic measuring
(b) Automatic centering and datum plane compensation
(c) Cutting accuracy monitoring
(d)Data prntout
Cont. on page 3
Page 3 of 3
Options (cont.)
Tool management
(a) Tool life monitoring
(b) Automatic tool replacement
Self diagnosis
(a) Alarm message on CRT
(b) Ladder diagram display
Each of the following NC options are included in the base machine price
Inch/Metric converstion
Linear acceleration/deceleration before interpolation
Tool length measurement
Manual pulse generator interruption
Total tape storage, 1,280m
Tape editing expansion
I/O interface RS232C, RS422 or 20mA current loop
(2) Coolant block on right angle head to accommodate oil hole drill adap
ter
Thermal stabilizer for rear of column
Chip conveyor on both sides of the table
Automtic tool measuring device
Load monitor
Additional tool compensation, 100 sets