PRO-ECO SLITTING LINE WITH KOR FLEX IN LINE LEVELOR

GENERAL SPECIFICATIONS:

COIL SPECIFICATIONS
Three slitter heads
Entry coil car 50,000 LBS
Exit coil car 50,000 LBS
Entry coil weight 50,000 LBS
Entry coil width min. 12"
Entry coil width max. 74"
Entry coil O.D. 72" Max.
Entry coil I.D. 20/24"
Exit coil weight 50,000
Exit coil ID 20/24"
Exit coil min. width 2"
Tooling for 3 heads
Tooling for high carbon HSLA
Tooling shimless
Hydraulic lock up arbors
Center bearing for extra cuts capacity
Electrical system replaced 2006
Slitter heads are motorized for clearance and open and close of set-up
Control station for operator
Gage detector non-contact
Scrap winders 2 auto discharge
Leveler can be moved in or out of pass line
LEVELOR Kor-Flex Leveloe
SLITTER SCR DC DRIVES REplaced 2006
GAGE LIMITS
0.015" - 0.194"
LINE SPEED
1,000 f/m
Cont. on
GENERAL SPECIFICATIONS:
(cont.)
SLITTE ARBOR DIA. 8"
Kive diamter 14"
NUMBER OF CUTS WITH 60,000 PSI Thickness ins.
Without Center Bearing With Center Bearing
.015 31 -
.020 31 -
.024 28 -
.030 23 -
.036 19 -
.042 17 -
.048 15 -
.054 13 -
.060 12 -
.067 11 -
.075 10 -
.090 8 -
.105 7 -
.120 6 21 500 FPM 500 PPM
.135 6 19 500 FPM 500 PPM
.150 5 16 500 FPM 500 PPM
.164 5 13 500 FPM 500 PPM
.180 4 11 500 FPM 500 PPM
.194 4 9 500 FPM 500 PPM
MATERIAL
Low carbon steel
High carbon steel
Stainless steel
Coated steel products
DIRECTION OF TRAVEL
Left to Right Line
Edge Guide Electro/Hydraulic not contact
Equipment condition PRIME
Year Purchase 1986 - Up graded to up date technology 2006
Cont. on page 3
Page 3 of 3
GENERAL SPECIFICATIONS:
(cont.)
All ectrical control drives and motors - New 2006
Kor-Flex levelor New 2005
Uncoiler 150 HP
Slitter head drive motor 150 HP
Recoiler drive 250 HP
Three Injecta-Heads for quick change approx. 90 seconds
Cary over table all rolls chrome hardened
All shim less tooling - enough for spare sets
Modes of operation - Full-Post loop
Tight Line
Slitter Assist
Exit Turn stile 4 arm - 50,000 lbs per arm
Entry Turn stile arm - 50,000 lbs per arm
Tension Stand drag board stand
Tension Roll Stand 2 Roller sets one for oily material and one for dry
surface sensitive material
Entry Crop shear
Exit Parting sheat
Two Scrap Winders with automatic bundle discharge
Computer Program for set-ups
Locking Nuts Hydraulic on arbors
Cascade Rolls hardened and chromed
Includes All tooling tables and storage stands and set accessories
Includes Custom steel wood lined cases for knives
Tooling Bars Multiple quick change
Line is stored in a heated building, and includes all incidentals for operat
ion,
such as hydraulic pumps peeler table, Overarm and tooling bars
This line is a virtual "Plug and Play"