MATSUURA MAM 600HF CNC PRECISION HORIZONTAL MACHINING CENTER

X-Axis travel 23.6"
Y-Axis travel 21.6"
Z-Axis travel 21.6"
From pallet surface to spindle center 3.1" - 24.8"
Pallet center to spindle gauge plane 3.9" - 25.5"
Table (Pallet)
Pallet working surface 15.7" x 15.7"
Pallet (table) loading capacity 400 kg
Pallet surface configuration Tapped holes
Min. table indexing angle 1 Deg.
Table indexing time 3 sec. / 90 deg.
Table clamping force 48 K.N
Spindle
Spindle speed range 30-8000 min.
Spindle speed change command S2 Digits direct
command
Type of spindle taper hole 7/24 Taper No.40
Spindle bearing inner diameter 3.14"
Max. spindle torque 35.7 kgm
Spindle air blow Standard
Spindle orientation Standard electric
Feedrate
Rapid traverse rate (X/Y/Z) 944.8" / min.
Feedrate (X/Y/Z) 0.1" - 393.7"
Jog feedrate 0 - 157.4"
Min movement increment (X/Y/Z) 0.001mm
Automatic tool changer
Type of tool shank JIS B 6339 Tool shank
40T
Type of retention knob JIS B 6339 pullstud 40P
Tool storage capacity 60 PCS
Max. Tool diameter 3.14"
When the pockets on both sides are empty 5.9"
Cont.on
L (cont.)
Automatic tool changer (cont.)
Max. tool length 13.7"
Max. tool mass 10 kg
Method of tool selection Address code and
random selection
Tool changing time tool-to-tool 2.4 sec.
Tool changing time chip-to-chip 6.0 sec. 25% of Z axis
stroke, spindle at 1000
RPM
Tool pocket pitch 3.2"
Automatic pallet changer
No. of pallets 2
Method of pallet change Turn table methods
Pallet changing time 10 sec.
Pallet clamping force 48 K.N.
Weight of pallet/PC 84 kg
Pallet size 15.7" x 15.7"
Pallet (table) loading capacity 400 kg
Motors
Spindle drive motor (hi-tech drive) AC11/7.5ks (40%
ED/cont.)
Feed motors
X-Axis Model USAFED-30FS2 AC2.9kw
Y-Axis Model USAFED-30FS20E AC2.9kw
Z-Axis Model USAFED-44FS2 AC4.4kw
Hydraulic pump motor AC1.5kw
Lubricant pump motor 0.02kw
Coolant pump motor 0.4kwx1, 1.5kwx2
Spindle oil cooler motor 0.4kw
Power supply
Cont. on page 3
Electrical power supply
48 KVA(For PC-2S
machine)
63 KVA (For PC-12)
AC 200/220V +/- 10%
3 dia. 50/60 Hz
Except above,
transformer is required
Compressed air supply 0.54-0.93 MPA (5-
9.5kg/cm3)
Tank capacity
Hydraulic oil tank capacity 15L
Lubricant tank capacity 2L
Coolant tank capacity 650L
Spindle oil cooler tank capacity 14L
Machine size
Machine height 2760mm (from ground)
Floor space 2700mm x 5600mm
Mass of machine + NC 9500 kg
Distance from floor to table surface 1050mm

MOTOR SPECIFICATIONS

15 HP Main drive motor