EX-CELLO MODEL 36 FORM GRINDER

Maximum diameter work ground with 18" wheel 8"
Maximum diameter work ground with 14" wheel 12"
Maximum diameter swing over table 19"
Maximum diameter work inserted through work spndl 3"
Maximum work length between centers 48"
Maximum threaded portion of work,
from headstock center 36"
Grinding wheel size
Diameter 18"
Hole 9"
3/8" to 2" Thick
Minimum grinding wheel diameter 13"
Grinding wheel speeds 900 to 1580 in 10 Steps
1485 to 2640 in 10 Step
s
Work spindle speeds, maximum 400 RPM
Threads per Inch obtainable with standard gears 1 to 128
Maximum lead obtainable with special gears 12"
Maximum helix setting, right or left 45 Deg.
Lead control, maximum per foot .020"
Wheel feed, on work diameter (per pass) .001" to .030"
Automatic wheel feed, maximum on work dia.(total) .165"
Dresser feed, on wheel diameter .0004" to .010"
Wheel motor Standard 3 HP, 1800 RPM
To suit special applications 5 to 25 HP, 1800 RPM
Hydraulic pump motor 3 HP, 1200 RPM
Coolant pump motor 3/4 HP, 3600 RPM
Dresser motor 1/10 HP, 1800 RPM
Lubricator motor 1/10 HP, 1800 RPM
Coolant tank capacity 100 Gal.
Coolant pump capacity(approx.) 3/4 HP
Cont. on

(cont.)
Hydraulic reservoir capacity 20 Gal.

MOTOR SPECIFICATIONS

3 HP - 1800 RPM