CHARMILLES ROBOFIL MODEL 310 CNC WIRE CUT EDM

Machine
Overall dimensions (LxWxH) 70.9" x 63" x 87.8"
Weight of equipment (without dielectric) 5500 Lbs.
Dielectric capacity 66 gallons
X-Y Travel 15.7" x 9.8"
U-V Travel 15.7" x 9.8"
Programmable Z travel 0 to 15.7"
Maximum taper angle 30 Degrees
Measuring resolution .00002 In.
Workpiece size 33.5" x 19.7" x 15.7"
Maximum workpiece weight 1100 Lbs.
Manual speed 0 to 35"/Min.
Wire Circuit
Wire tension 0.7 to 6.6 Lbs.
Wire feed rate 0.7 to 50ft./min.
Wire spool weight 35 Lbs.
Automatic Threadings
Maximum threading height 11.8"
Maximum threading hole diameter 0.08"
Standard wire guide diameters 0.01"
Optional wire guide diameters 0.004"-0.012"
Rethread after wire break Standard
Filtration 8 paper cartridge filte
rs
Deionization 1 bottle
Programmable injection 200 p.s.i.
Electrical cabinet
3 Phase 400 V
Additional transformer 208,220,240,440,480 V
Permissible fluctuation + 10% to -15%
Permissible micro break 5 ms
Battery backup 100 hrs.
Total installed power 10 KVA