10" X 30" CINCINNATI TRAY TOP ENGINE LATHE

GENERAL SPECIFICATIONS:

Swing over bed 10-1/4"
Swing over cross slide 6"
Distance between centers (max. turning length) 24" to 36"
Center distance increase increments 6"
Area of tray top 165 sq. in
Spindle speeds (number) 12
Spindle speed range - high 45-1800 RPM
Spindle reverse Electrical
Spindle nose - standard long taper key drive L00
Spindle - diameter of hole through 1-11/32"
Spindle - number of bearings 3
Spindle - size of center No. 2 Morse
Headstock - base length on bed 17-1/2"
Number of thread and feed changes 48
Range of threads per inch 3 to 184
Range of feeds-carriage (inches per turn of spindle) .0019 to .1215
Range of feeds-cross slide (inches per turn of spindle) .0005 to .0308
Leadscrew (Acme) (diameter and threads per inch) 1-1/8"-8
Range of metric leads with (2) conversion gears, mm .1875 to 11.5
Range of feeds-carriage (mm.per turn of spindle) .0683 to 4.1912
Range of feeds-cross slide (mm.per turn of spindle) .0173 to 1.0625
Cross slide travel 8"
Top slide travel 2-1/2"
Solid tool size 3/8" x 3/4"
Tool holders-size of tool shank 3/8" x 7/8"
Carriage bearings on ways 18-1/4"
Width of bridge 4-3/4"
Area of tray top 32 sq.in
Spindle travel 3"
Spindle diameter 1-1/4"
Spindle-size of center No.2 Morse
Tailstock body -length on bed 7"
Tailstock set-over (either side of center) 1/2"
Maximum taper per foot 3-1/2"
Turns at one setting 12"
Weight-boxed for export 2469 lbs.
Space occupied (crated) 47"W x 61"H x 7
8"L

MOTOR SPECIFICATIONS

Motor-standard 3/60/440 1 HP
Motor-high spindle speed range 1-1/2 HP