CITIZEN CINCOM MODEL B12-V CNC SWISS TYPE LATHE

Page 1 pf 2

Maximum machining diameter 12mm (1/2")
Maximum machining length 135mm
Maximum drilling diameter 6mm
Maximum tapping diameter M6
Spindle through-hole diameter 14mm
Main spindle speed 100-12,000 min-1
Main spindle speed change S5-digits direct comman
d
Number of mountable tools Cutting tools 5
7 in type I,V
Tool sizes Cutting tool 10 x 10 x
120mm
Sleeve diameter 20mm (19.05mm)
Rapid traverse X/Y/Z-axis 15m/min.
Least input increments Virtual X-
axis0.001mm(dia.)
Z-axis 0.001mm
Motors
Main spindle drive 1.5/2.2kw (15 min.ratin
g)
X/Y/Z-axis feed 0.3
kw x 3
Chuck opening/closing 0.2 kw
Separator 0.2 kw
Cutting oil 0.18 kw
Lubricating oil 0.003 kw
Power consuption 4 kVA (at a max. load)
Center height 1,000 mm
Mass Type I/II 950 kg
Type V/VI 1,300 kg
Cont. on

(cont.)
Maximum chuck diameter 12mm (1/2")
Maximum product takeout length 80 mm (60mm when
RGB is used, 95mm
including cutting-off t
ool
when separator function
is used
Maximum workpiece profusion length from back
spindle end face 30mm
Back spindle maximum drilling diameter 3 mm
Back spindle speed 100-7,000 min
Back spindle speed change S4-digits direct comman
d
Back spindle (A2-axis) rapid traverse 200mm
Motors Back spindle drive0.5
kw
A2-axis feed 0.2 kw
Number of back machining tools 3
Back spindle synchronous function The spindle rotations a
re
synchronized with the
main spindle speed
Spindle phase alignment Phase alignment is
disabled between front
spindle and back
spindle