METHODS SLANT 50 CNC TURNING CENTER

Maximum swing over bed 20"
Maximum machining diameter 12.4"
Limit machining diameter (adjusting tool) 13.78"
Maximum machining length 24.59"
Chuck diameter 10"
Distance between spindle nose and turret face 32.87" max
6.30" min
Spindle
Drive motor
Rating Continuous/30 min.
15/20 HP
Speed range (continuous, variable) 35 to 350 RPM
Spindle nose A2-8
Hole through spindle 3.15"
Hole through draw tube 2.56"
Center height from floor 40.16"
Center height of head2.52"
Access to spindle center from machine guards 16.02"
Saddle
Configuration
Bed Horizontal
Saddle 30 degree slant
Feed servo motors
X-axis 1.2 HP
Z-axis 2.5 HP
Effective slide travel
X-axis 7.16"
Z-axis 26.57"
Turret
Head type 10 work position drum
Number of tools 10
Tooling size
Turning tool 1" x 1"
Boring tool 0.5" - 1.75"
Turret clamping force 5200 KG

Tailstock
Spindle diameter 3.54"
Spindle travel 5.12"
Spindle tapered bore M.T. No. 5
Thrust 700 KG to 15 KG
Pressure 298 to 7 PSI
Lubrication unit
Type Japan "Lube" MMXL-II
Delivery capacity 1.5 to 2.5 CC per strok
e
Tank capacity 2 quarts
Delivery pressure 57 PSI
Type of lubricant Mobil Vactra #2
Coolant unit
Pump type NQ-180J Mitsubishi
Motor 200/220 VAC
180W
50/60 Hz
Delivery 21 to 40 gal per min
Lift of pump 10 feet
Water tank capacity 37 gallons
Hydraulic unit
Pump UVD-1A-A3-1.5-4-
1849B
Japan
Motor AC1.5KW, 50/60 hz
3 phase
System pressure 50 psi
Pump delivery 5 to 6 gal per min
Oil tank capacity 20 gallons
Type of oil DTE 24
DIMENSIONS
118" x 66" x 72" H
Weight 10,000 lbs

Page 3 of 3

MOTOR SPECIFICATIONS

15/20 HP (cont./30 min)
240 Volt
3 phase