MINSTER MODEL MS 20-10-7 COIL STRAIGHTNER

Capacity (based on Mild Steel)
Max. Strip Thickness .240"
Minimum Strip Thickness .020"
Max. Strip Width 10.00"
Max. Width at Max. Thickness 5.00"
Max. Thickness at Full Width .160"
Line Speed 120-1200 IPM
Electrical Supply 480 Volt-3 Phase 60hz
Pneumatic Supply 80 PSI Shop Air
Feed Direction Right to Left
Paint Vista Green
Furnished with Seven (7) Working Rolls Mounted in Anti-Friction bearings
2.00" Dia. x 12.12"Wide, hardened and ground finish.
Upper rolls adjustable individually by manual hand wheel w/indicator
(2) Sets of air actuated pinch rolls mounted in Anti-Friction bearings
3.33" Dia. x 12.12" Wide, hardened ground finish.
Pinch rolls and Work rolls (Upper & Lower) driven through a gear train
by a 5 HP, variable speed, eddy current drive through a speed reducer.
Also furnished is an eddy current proportional brake.
Overstock loop arm signals the drive control to maintain the stock loop
between the straightener and feed.
All wiring to common terminal box
Pushbutton Station on operator's side
Free standing NEMA 12 Control panel with disconnect
Feed line height - 48" at exit end of 15 Degree inclined head
Includes stock catenary support on exit end and individually operated stock guides
for centerline or offset positioning of strip on entry side.
Class D lubrication system. A minimum of 34 individual points plumbed to a
common location for convenient manual grease lubrication of each point.
All Components for the interconnection of hydraulic, pneumatic, and electricals, between
pieces of equipment are furnished by the user.
Guarding is supplied per Minster's interpretation of ANSI B11.18 Safety Standards