10" X 30" LANDIS 2R PLAIN CYLINDRICAL GRINDER WITH

Nominal work swings10"
Maximum work swing over table10-31/32"
Nominal distances between work centers30"
Maximum work swing and diameter standard
machine will grind with full size
standard wheel on straight wheelhead
machine with hydraulic infeed stroke
as noted10"
Minimum diameter wheel to grind zero
diameter work on centers on straight
wheelhead machines15"
Maximum work swing and diameter standard
machine will grind with full size standard
wheel on angle wheelhead machine with
hydraulic infeed stroke as noted10"
Minimum diameter wheel to grind zero
diameter work on centers on angle
wheelhead machines15"
Coolant tank capacity - gallons28
Hydraulic tank capacity - gallons19
Work carriage traverse speed in./min.
all lengths thru 72"2 to 240
Traverse speed per turn of handwheel
Slow0.100"
Fast1.000"
Work rest capacity1/4" to 2-1/2"-6"
1/4" to 4"-10"
Wheelhead and wheelfeed grinding wheel
size standard24" X 2" X 12"
Grinding wheel - maximum width5"
Grinding wheel spindle speeds - RPM1000/1271
Grinding wheel - minimum diameter of
worn wheel15"
Hydraulic rapid infeed - straight wheelhead
machine - max. std.2" (CONTINUED)

(CONTINUED)
Hydraulic rapid infeed - min. std.1/2"
On Diameter Increments
Ranges total feed (stock removal) inches 0 to .999 .001
Fast feed (stock removal) inches 0 to .999 .001
Medium feed stock (stock removal) inches 0 to .099 .001
Microfeed (stock removal) inches 0 to .009 .001
Rates - fast feed IPS 0 to .0099 .0001
medium feed IPS 0 to .0099 .0001
microfeed IPS 0 to .00099 .00001
approach feed rate IPS 0 to .009 .001
Traverse grinding
Increments at table reversal, inches 0 to .0099 .0001
Number of sparkout traverses 0 to 9
Headstock and footstock Work centers #10 Jarno
Footstock center movement by Lever only
Headstock work speeds - rpm - dead spindle 94-154-246-400
live spindle 100-154-240-400
Swivel table graduated inches per foot 3-1/2"
degrees included angle 16 degrees
Height from floor to work centerline 39-3/4" length
between centers
41-3/4" lengthbetween cent
ers
Weight - net 6" - 9,200 lbs.
10" - 8,700 lbs.

MOTOR SPECIFICATIONS

7-1/2 HP Wheel drive motor
2 HP Hydraulic pump and lubricating drive motor
1/2 HP Work drive motor
1/3 HP Coolant pump motor
1/4 HP Wheel spindle lubrication pump motor
(CONTINUED)
Page 3 of 3