6" X 18" LANDIS 2R 30 DEGREE ANGULAR WHEELHEAD PLA

Maximum work swing over table6-31/32"
Maximum distance between work centers18"
Maximum work swing with full size wheel
and 2" hydraulic infeed 6"
Work carriage handwheel speeds (2) 1.00/.100 IPR
Grinding wheel size, maximum 24" x 4" x 12"
Max. hydraulic rapid wheelhead infeed stroke 2"
Fast feed rate 0 - .0099 IPR
Micro feed rate 0 - .00099 IPR
Approach feed rate 0 - .009 IPR
Swivel table graduated inches per foot 4-1/2"
Swivel table graduated degrees included angle 20 degrees
Headstock work speeds, dead spindle 94-154-246-400
Headstock and footstock work centers #10 Jarno
Approximate weight 8,500 lbs.

MOTOR SPECIFICATIONS

10 HP 3/60/230-460 Wheel drive motor
2 HP 3/60/230-460 Hydraulic and lubricating pump motor
1/2 HP 3/60/230-460 Headstock drive motor
1/3 HP 3/60/230-460 Coolant pump motor
1/4 HP 3/60/230-460 Grinding wheel spindle lubrication
pump motor