MODEL 1222-18 MULTIPLE SPINDLE (18 SPINDLE) DEKA D

Spindle drive 9/16" Hex drive
Drilling capacity
Mild steel (18) 1/4"
(10) 1 3/32"
(4) 11/16"
Gray cast iron (18) 5/16"
(10) 1/2"
(6) 11/16"
Tapping capacity
Mild steel (18) 10 - 32 N.F.
(9) 3/8 - 24 N.F.
(5) 5/8 - 18 N.F.
Gray cast iron (18) 1/4 - 20 N.C.
(8) 1/2 - 13 N.C.
(5) 3/4 - 10 N.C.
Feed stroke of table 6"
Distance between head flange and
table top (maximum) 28"
Distance between head flange and
table top (minimum) 14"
Opening of head front to back and
left to right 14-1/2" X 22-3/4"
Center of head to face of ways on
column 12"
Number of spindle drives 18
Spindle speeds (12) 174-1560 RPM
Working surface of table front to
back left to right 19-3/4" x 29-1/2"
Standard feeding stroke 6"
Maximum feeding pressure 9,000 lbs.
Range of feeding, rate, inches per minute 0" to 90"
Rapid transverse rate, inches per minute 120"
Floor space front to back and left to right 46" x 58"
Height of machine 110-1/2"
Weight of machine 4,400 lbs.
(CONTINUED)

MOTOR SPECIFICATIONS

10 HP AC Main drive motor and control
3 HP AC Hydraulic motor