15" X 54" AMERICAN PANTHER MODEL #2208 UNIVERSAL CNC TURNING

Headstock
Spindle Speed 18/1800 RPM
Range 1 constant HP from 115 RPM
Range 2 constant HP from 290 RPM
Range 3 constant HP from 720 RPM
Spindle drive motor 20/30 HP DC
Spindle hole 4 5/8"
Spindle nose A1-11"
Swing over ways 22"
Swing over carriage 18"
Maximum turning diameter (ctrs.) 8"
Distance between centers 54"
End turret and carriage
Carriage cross travel X axis 17 1/2"
Above ctr. line of spindle 1.5"
Below ctr. line of spindle 16"
Tail Stock
Spindle type Built-in, anti friction
Spindle (quill) diameter 4"
Spindle (quill) travel 10"
Clamping to bed 6 bolt
Spindle actuator Hydraulic
Spindle clamp Mechanical, hydraulic lockout
(continues)
Carriage Longitudinal Travel
Z axis 56/80"
Side turret type Disk
Side turret size 12 1/4"
Size of curvic coupling 8 1/2"
Number of index positions 8
Face (minimum) 4 7/8"
Tool holder size 1 1/4 x 1 1/4 x 5"
Feed rate range 0.1/4000 IPM
Auto traverse rate (maximum) 400 IPM
Cross ball screw diameter 1 1/4"
End turret size (across flats) 12 1/2"
Size of curvic coupling 10 1/2"
Number of index positions 6
Face (minimum) 7 3/8"
End turret face to spindle
Face (maximum) 63-3/8 & 87-3/8"
Tool size 1 1/4 x 1 1/4 x 5"
Feed rate 0.1/400 IPM
Auto traverse (maximum) 400 IPM
Manual (maximum) 400 IPM
Ball screw diameter 1 1/4"
Cross travel X axis 17 1/2"
Tool tip center line of spindle above 17.3"
Tool tip center line of spindle below .2"
Reservoir Capacities
Waylube 2 Gal.
Headlube 20 Gal.
Hydraulic 20 Gal.
Coolant 37/42 Gal.
Page 3 of 3
(continue)
Bed and Base
Length 13/15'
Distance between ways 20"
Way size - top and bottom 1 1/4" x 2 1/2"
Long ball screw diameter 2"
Overall dimensions
Overall length 175"
Overall width 65"
Overall height 85"
Approximate weight 24,000 Lbs.
Square feed of approximate floor space 80

MOTOR SPECIFICATIONS

Electric Power
30 HP main drive motor
Volts 230/460
Phase 3
Hertz 60
KVA 58