HAUSLER MODEL BSM-10 HYDRAULIC OFFSET ROLLING MACHINE

Capacity 3/8" thick steel
Maximum length of tank (with repositioning to do both sides)
14'
(can be increased ty extending hyd. lines and repositioning b
ase)
Number of forming shafts 2
Diameter of forming shafts 4 1/2"
Length of upper forming shaft 3 1/4" (keyed)
Length of lower forming shaft 4" (keyed)
Power vertical adjustment to lower forming shaft 6" (approximate)
Diameter of forming rolls 12"
Face of upper forming roll 2 1/4"across, 1/4"down,
1 1/4"across
Face of lower forming roll 2 1/2" across
Number of power guide rolls 2
Diameter of guide roll shafts 1 1/2"
Horizontal guide roll face 12" long (each)
Working height above floor 36"
Handling table power travel maximum 36"
Handling table manual travel maximum 72"
Weight approximate 10,000 lbs.
Overall size of machine 72"L x 60"D x 70"H
Overall size of handling table 108"L x 96"D x 48"H

MOTOR SPECIFICATIONS

15 KW 3/60/440 Volt Main pump motor
Lube pump motor
Swing arm pendant control for start/stop, table in/out, table lift/lo
wer,
bottom roll lift/lower, automatic/manual, forward/return for guide ro
lls,
start roll rotation, rotation forward/reverse