MONARCH VMC-150 CNC VERTICAL MACHINING CENTER WITH

Compound Table
Axis movements,
table left and right-"x" axis 50"
saddle in and out-"y" axis 30"
Overall table size 33 1/2" x 54"
Table working surface with subplate 31 1/2" x 54"
Table and saddle positioning speed 400 IPM
Milling feed rates programmed directly
in IPM or MM/Min 0.1 to 400 IPM
Positioning accuracy throughout 0.001"
Positioning repeatability 0.0005"
Table load capacity 4000 lb
Sliding Head
Head travel, up and down 24"
Power elevation of head-traverse rate 40 IPM
positioning repeatability 0.001
Quill
Quill travel, vertical "z" axis 10"
Minimum and maximum distance spindle
nose to table top 0 to 32 1/2"
Centerline of spindle to column 33 1/2"
Quill diameter 5 3/4"
Quill traverse rate 200 IPM
Quill feed rate 0.1 to 40 IPM
Quill thrust 5000 lb
Quill depth control accuracy 0.001"
Quill depth control repeatability 0.0005"
Spindle
Spindle speeds 80
Spindle speed range 45 to 3500 RPM
Spindle drive 7 1/2, 3 3/4 HP AC 11 1/4 HP for 30 Min.
Spindle chuck taper No. 45 ASA
Spindle diameter at lower bearing 3 1/8"
Spindle radial orientation by tape command
Overall Machine
Approximate weight 21,000 Lbs.
Approximate floor space with control 204" x 144"