SIP MODEL HYDROPTIC-6A PRECISION JIG BORING MACHINE

Working range
nominal table travel40" - 1000 mm
nominal spindle head travel28" - 700 mm
Distance from table top to spindle end (spindle retracted)
Maximum 39 1/4" - 1000 mm
Minimum 8" - 200 mm
Free space between uprights43 1/4" - 1100 mm
Vertical traverse of cross-rail31 1/4" - 795 mm
Maximum free space under cross-rail37 1/2" - 955 mm
Work table
Working surface41 1/4" x 33" or 1100 x 842 mm
Width of T-slots.63" - 16 mm
Maximum load2,200 lbs. - 1000 kg.
Fine hand setting.0055" - .015 mm/rev.
Hydraulic feeds
for milling up to20" - 500 mm/min.
for rapid traverse100" - 2500 mm/min.
Measuring device
Graduation of built-in standard scales0.1" - 1 mm
Reading on external auxiliary scales0.1" - 1 mm
Reading on micrometer heads of screens
1) dial.001" - 0.01 mm
2) vernier0.0001" - 0.001 mm
Spindle depth measuring device
Measuring range12" - 300 mm
Reading on dial0.0005" - 0.01 mm
Automatic milling feeds (4) in each direction from1 1/8 to 7 1/4 mm/min
.
30 to 180 mm/min.
Spindle Quill diameter5 5/16" - 135 mm
Internal clamping taper#4 Morse
External clamping taperSIP 4e (DIN 2201)
Working spindle speeds (20)40 to 2000 RPM
Power feeds0.0016 - 0.014 in/rev.
Spindle quill traverse12" - 300 mm

Drilling capacity from the soliddia. 2 3/8" - 60 mm
Boring capacitydia. 12" - 300 mm
Approximate weight21,000 lbs. - 9,500 kg
Dimensions of machine box154" x 110" x 114" h

MOTOR SPECIFICATIONS

8 HP 3/60/440 2 Speed reversing spindle drive motor
1 HP Reversing tool clamp motor
1 1/2 HP Reversing cross rail elevation motor
1/3 HP Spindle head saddle rapid traverse & milling feeds motor
1 1/2 HP Hydraulic pump motor
1/5 HP Oil cooling pump motor
1/5 HP Coolant pump motor