1/2" BROWN & SHARPE #00 R/S SINGLE SPINDLE

Spindle capacity 1/2"
Turns any length to
at 120 RPM driveshaft speed1-1/2"
at 240 RPM driveshaft speed1"
Spindle hole diameter11/16"
Spindle speeds
Total speed range 34 to 8665 RPM
Number of high speeds 18
High speed range 542 to 8665 RPM
Maximum speed with reversal7188 RPM
Number of second speeds 15
Drive shaft
Runs at constant speed of120 or 240 RPM
Drive sleeve
Runs at constant speed of120 or 240 RPM
Production rates
No. of rates for each driveshaft speed60
Time required to produce one piece per cycle
with 240 RPM driveshaft speed3/4 to 50 seconds
with 120 RPM driveshaft speed1-1/2 to 100 seconds
Minimum cycle with reversal3 seconds
Stock feeding mechanism
Maximum feed length setting
with 240 RPM drive sleeve speed1"
with 120 RPM drive sleeve speed2"
Time required for feeding cycle
with 240 RPM drive sleeve speed1/4 seconds
with 120 RPM drive sleeve speed1/2 seconds
(Cont.)
Turret
Diameter .6 hole 3-3/8"
Diameter of tool holes5/8"
Upper slide rear
Longitudinal adjustment 1"
Cross slides
Maximum travel 1-1/8"
Screw adjustment 1/2"
Lubrication - automatic
Capacity - auto. lubrication reservoir2-3/4 gallons
Base reservoir4 gallons
Coolant system
Capacity of reservoir9 gallons
Overall dimensions 83" L x 45" W x 79" High
Approximate weight 3,150 lbs.

MOTOR SPECIFICATIONS

3 HP Spindle motor