6 5/8" WICKMAN 6 SPINDLE AUTOMATIC CHUCKING MACHINE

Chuck diameter 6.11/16"
Maximum swing over main tool block nose6.11/16"
Maximum swing over main tool block faces5"
Travel per jaw
10 degree wedge (standard)7/32"
15 degree wedge (special)5/16"
Draw bar travel 1-1/4"
Height of spindles from cross slide2-1/2"
Feed stroke of main tool block 0 to 5"
Feed stroke of upper independent slides0 to 5"
Approach stroke of main toolblock and independent slides
Standard 4"
Special4-1/4"
Feed stroke of lower cross slides0 to 1.3/8"
Feed stroke of upper cross slides0 to 2.1/8"
Total feed and/or approach stroke of upper cross slides (special)3"
Spindle speed range
960 rev/min motor 51 to 862 rev/min in 32 steps
1450 rev/min motor78 to 1302 rev/min in 32 steps
Feed range at maximum stroke 0.0048 to 0.054"
Range of cycle time
960 rev/min motor 10.6 to 1297 secs
1450 rev/min motor7 to 859 secs
Idle time
960 rev/min motor 3.8 secs
1450 rev/min motor2.5 secs
Maximum airline pressure 100 lb/in-2
Maximum consumption of air at 100 lb/in-25 ft-3/min
Overall dimensions 58" x 163-1/4"
Approximate weight 20,160 lbs.

MOTOR SPECIFICATIONS

25HP 3/60/230/460 Main drive motor & controls
3HP 3/60/230/460 Hydraulic motor
1/4HP 3/60/230/460 Chip conveyor motor