18 SPINDLE DEKA MODEL 1222-18 HYDRAULIC

Spindle drive 3/4" Hex. drive
Thrust 9,000 lbs.
Drilling capacity
Drilling Mild Steel (18) 9/16 drills
(SAE 1020) 60 SFM (10) 25/32 drills
2-1/2" feed per minute (8) 7/8 drills
Drilling Gray Cast Iron (18) 21/32 drills
70 SFM (10) 7/8 drills
4" feed per minute (8) 1" drills
Tapping capacity
Tapping Mild Steel (18) 1/2-20 N.F.
(SAE 1020) (11) 3/4-16 N.F.
(9) 1"-14 N.F.
Tapping Gray Cast Iron (18) 3/4-16 N.F.
(10) 1-1/8-12 N.F.
(6) 1-1/2-12 N.F.
Floor to bottom of head flange 76"
Feed stroke of table 6"
Distance between head flange and table top
Maximum 40"
Minimum 26"
Opening of head, front to back and left to right 14-1/2" x 22-3/
4"
Center of head to face of ways on column 12"
Number of spindle drives 18
Working surface of table, front to back and left to right 19-3/4"
x 29-1/2"
Back edge of working surface table top to face of ways on column
1-1/2"
Overall table size, front to back and left to right 25" x 37-1/2"
Distance between T-slots, center to center, table top17-1/4"
Standard feeding stroke 6" (8" stroke optional)
Maximum feeding pressure 9,000 lbs.
Range of feeding, rate, inches per minute 0" to 90"
Rapid traverse rate, inches per minute 120"
Floor space, front to back ang left to right 46" x 58"
Approximate machine height 126" with 15 HP Motor
Approximate weight 4,400 lbs.

MOTOR SPECIFICATIONS

7-1/2/15 HP 2-speed 3/60/220 Main drive motor and controls
3 HP 3/60/220 Hydraulic motor