10" X 18" LANDIS MODEL 2R PLAIN CYLINDRICAL PLUNGE FEED

Maximum swing over table 10-31/32"
Distance between work centers 18"
Grinding wheel spindle speeds 1000/1271 RPM
Hydraulic rapid in feed travel
Maximum 2"
Minimum 1/2"
Hand table traverse 2 speed
Grinding wheel size 24" x 3-1/8" - 4" x 12"
Workhead spindle speeds, variable20 to 200 RPM
No. 10 Jarno spindle hole with 3A2 spindle taper on headstock
No. 10 Jarno spindle taper for footstock
Wheel feed
Total feed (stock removal), inches0 to 0.999 in increments
of 0.001
Fast feed (stock removal), inches on diameter 0 to 0.999 in in
crements
of 0.001
Medium feed (stock removal), inches on diameter0 to 0.099 in in
crements
of 0.001
Microfeed (stock removal), inches on diameter 0 to 0.009 in in
crements
of 0.001
Fast feed ips on diameter 0 to 0.0099 in increments
of 0.0001
Medium feed ips on diameter0 to 0.0099 in increments
of 0.0001
Microfeed ips on diameter 0 to 0.00099 in increments
of 0.00001
Approach feed rate ips on diameter0 to 0.009 in increments
of 0.001
Approximate weight 8,500 lbs.

MOTOR SPECIFICATIONS

10 HP 3/60/230/460 Wheelhead motor & controls
2 HP Vee-Arc DC Workhead motor
2 HP 3/60/208-230/460 Hydraulic motor
1/4 HP 3/60/208-230/460 Way lubrication motor
1/4 HP 3/60/208-230/460 Grinding wheel lubrication motor