10" X 20" LANDIS 1R 30 DEGREE ANGULAR WHEELHEAD

Nominal work swing 10"
Nominal distance between work centers 20"
Carriage traverse per turn of handwheel 0.200"
Swivel table graduated
Inches per foot 4
Degrees included angle 20
Grinding wheel size - 16" x 3" x 5"
Grinding wheel speeds 1,500 & 1,900 RPM
Hydraulic rapid infeed stroke 1-1/2"
Total feed (stock removal), inches on diameter 0 to 0.999
in increments
of 0.001
Fast feed (stock removal), inches on diameter 0 to 0.999
in increments
of 0.001
Medium feed (stock removal), inches on diameter 0 to 0.099
in increments
of 0.001
Microfeed (stock removal), inches on diameter 0 to 0.009
in increments
of 0.001
Fast feed ips on diameter 0 to 0.0099 in increments
of 0.0001
Medium feed ips on diameter 0 to 0.0099 in increments
of 0.0001
Microfeed ips on diameter 0 to 0.00099 in increments
of 0.00001
Approach feed rate ips on diameter 0 to 0.009 in increments
of 0.001
Headstock work center #10 Jarno
Footstock work center #6 Jarno
Headstock work speeds 0 to 600 RPM
Headstock spindle nose 5A2
Approximate weight 5,500 lbs.

MOTOR SPECIFICATIONS

5 HP 3/60/230/460 Wheelhead motor & controls
3/4 HP D.C. Work drive motor
1 HP 3/60/230/460 Hydraulic motor
1/4 HP 3/60/230/460 Spindle lubricating motor