#5 CINCINNATI PLAIN DIAL TYPE MILLING MACHINE

Table
Working surface 94-1/2" x 20"
Size overall 94-1/2" x 20"
T-slots, number and size Three (3) 13/16"
Distance between t-slots 4-1/4"
Range
Longitudinal 50"
Cross (without brace) 14"
Vertical 20"
Maximum centerline spindle to top of table 20"
Minimum centerline spindle to top of table 0"
Face column to braces, maximum 40-1/4"
Spindle
Standard milling machine spindle nose No. 50
Diameter of nose 5-1/16"
Diameter of hole for draw-in bolt 1-1/8"
Speeds (24) 14 - 1400 RPM
Reverse Included
Feeds
Number 32
Range, longitudinal 3/8" - 90" per min.
Range, cross 3/8" - 90" per min.
Range, vertical 3/32" - 22-1/2" per min.
Longitudinal and cross feeds 3/8" - 90" per minute
(Vertical feeds are 1/4 these rates)
(CONT.)
Live Power Rapid Traverse (Spindle stopped or running)
Longitudinal 150" per min.
Cross 150" per min.
Vertical 37-1/2" per min.
Overarm (Rectangle, Dynapoise)
Distance from under side to centerline of arbor 8-1/8"
Coolant Equipment
Centrifugal pump, driven from machine Included
Capacity of pump 4 gals. per minute
Floor space 133-1/4" x 161-1/2"
Shipping Data (weights include motor and controls)
Net weight 15,300 lbs.
Domestic shipping weight (approximate) 16,300 lbs.
Export shipping weight (approximate) 17,800 lbs.
Size of case 92" x 115" x 60"
Volume of case 367 cu. ft.

MOTOR SPECIFICATIONS

20 HP Drive motor rating