ACIERA MODEL F3-R HORIZONTAL UNIVERSAL MILL

Profile Milling Machine F 3 P
Table size 7" x 23-1/2"
Spindle speed (8) 120 to 2,400 RPM
Maximum vertical distance between P25 table and nose of
vertical spindle 5-11/16"
Maximum vertical distance but with intermediate
Piece No. 354 (supplied on request) 8-7/8"
Maximum horizontal distance between machine body and axis of
vertical spindle 8 15/32"
Spindle with provision for collets Type W20
Number of spindle speeds 8
Motor speeds - 50 cycles 700/2800 RPM
Motor power 0,75/2 HP
Hand traverse by means of ground feedscrews (setting)
Longitudinal slide 12"
Vertical slide 12"
Transverse slide (headstock) 5.25"
Graduated drums, 1 division .001"
Net weight of machine without hydraulic group 1,210 lbs.
Overall dimensions 48" W x 40" D x 58" High
Copying Unit P25
Working surface of rotating table 9" diameter
2 x 2 T-slots 0.4"/0.7"
Maximum copying surface 10"
Copying radius 0 to 5"
Rotating speed of table (infinitely variable by potentiometer)
0,125 to 2 RPM
Directions of rotation of table 2
Minimum angle of attack of the cutter 15 degrees
Copying accuracy + .002"
Repeating accuracy + .0008"
Constant turning moment on the table spindle 114 ft-lb
Stylus pressure 7 oz.
Normal milling and climb-milling weight 265 lbs.
(CONT.)
Hydraulic Group
Pressure 284 lbs.
Power 0.75 HP
Capacity of reservoir, approximate 13 gallons
Delivery of pump 2.5 gallons
Weight, including reservoir 273 lbs.
Dimensions of group 21" L x 15" D x 24" High