MORVAY NON-FERROUS/FERROUS PULL THRU HIGH SPEED

GENERAL SPECIFICATIONS:

Capacity - originally set up for aluminum .010" to .040" thick x 18"
wide
Line speed 180 to 1800 FPM
Threading speed 50 to 150 FPM
Jogging speed 50 to 150 FPM
Running tensions
2 to 10 lbs. per inch of width @ 1800 FPM (.010")
6 to 30 lbs. per inch of width @ 600 FPM (.040")
Line consisting of
1) Loopco combination upender/downender
Power, s/n 708H4822A
2) Paxson two arm turnstyle, s/n 111357
Manual rotation
Manual push off
3) Morvay uncoiler - 54" maximum diameter
10 H.P. DC Variable speed drive
Hydraulic expansion
Hydraulic coil car
Pneumatic overarm holddown
4) Gauer non-powered edger station
5) Seco non-powered wiper station
6) Morvay pull thru type slitting head
25-1/2" Maximum width
3-1/8" Diameter arbors
3 H.P. 3/60/220-440 volt Feed up motor
7) Paxson motorized scrap winder, 1966
8) Morvay recoiler - 54" maximum diameter
25 H.P. DC Variable speed drive
Hydraulic push off
Pneumatic overarm separator
Power coil car
9) Reliance electrics updated by Reliance in 1980 with solid
state P.L.C.
Line running on 3/60/480 volt (but can be changed over to
220 volt)
10) Interchangeable recoiler mandrels, (2) 6" I.D., (1) 12" I.
D., (1) 16" I.D.,
(1) 20" I.D.
11) Lots of extra tooling including cutters, spacers, and misc
ellaneous parts.