RIGID KA200/2 HYDRAULIC TWIN SPINDLE DIE SINKER AND PROFILER

Basic Machine
1.1 Table mounting area 108.26" x 23.62"
1.2 Longitudinal copying stroke 41.33"
1.3 Transverse strode
Without reverse image attachment 19.68"
With reverse image attachment 17.32"
1.4 Vertical stroke 16.53"
1.5 Number of T-slots 4
1.6 Width of T-slots .7874"
1.7 Distance between spindle centers 28.34"
1.8 Approximate weight of machine 18,300 lbs.
1.9 Power of hydraulic unit 10 HP
1.10 Overall dimensions 172.8" L x 72.8" W x 112.2" H
Milling Heads
2.1 Number of milling heads 2
2.2 Number of milling spindles 2
2.3 Power of milling head motors, each 7 HP
2.4 Minimum distance between table and spindle nose 8.26"
2.5 Maximum distance between table and spindle nose 24.8"
2.6 Milling spindle taper USA 50
2.7 Quill travel 3.34"
Spindle Speeds
2.8 Number of RPM steps 9
2.9 Speed range 105 to 2230 RPM
(CONT.)
Feed Rates (infinitely variable by hydraulic drive)
3.1 For 360 degree profiling. 78 - 17.71"/min.
3.2 For automatic copying .78 - 17.71"/min.
3.3 For automatic pickfeed longitudinal and transverse .004 - .3
1"/min.
Vertical .004 - .24"/min.
3.4 Hydraulic rapid transverse longitudinal and transverse 78.74"/mi
n.

MOTOR SPECIFICATIONS

Electrics are 440/60/3 with separate control cabinet, spindle motos,
coolant pump motor,
hydraulic motor and all switch gear, etc. All contactors to be Klock
ner-Moeller, electrics
are approved European manufacturer, but in principle as per JIC stand
ards.