24" CINCINNATI BICKFORD BOX TYPE UPRIGHT DRILL

Capacity Swing
Center of spindle to front of lower column 12-1/2"
Center of spindle to face of upper column 11-1/2"
Measured on plane of table 11-1/4"
Maximum distance from spindle to finished surface of base 3'-
9 5/8"
Minimum distance, spindle to finished surface of base 17"
Maximum distance from spindle to table 2'-8 3/4"
Minimum distance, floor to table top, table in lowest position 19-
1/8"
Vertical adjustment of table 10-3/4"
Vertical adjustment of sliding head 17-1/2"
Vertical travel of spindle by power feed 10-1/2"
Vertical travel of spindle by hand feed 11-1/8"
Working surface of table 19" x 24"
Standard feeds furnished (thousandths per revolution) 5, 7, 9, 1
1, 15, 20, 25, 34 &
43
Standard speeds (12) with 1200 RPM motor 60 to 1,000 RPM
Spindle nose No. 4 Morse taper
Overall dimensions 26" x 62" x 9' 1" High
Approximate weight 2,650 lbs.

MOTOR SPECIFICATIONS

5 HP A/C Motor