12" X 24" BROWN & SHARPE DIAL-A-SIZE AUTOMATIC HYDRAULIC

Capacity
Maximum work width and length 12" x 24"
Maximum work height using 14" diameter wheel 18"
Spindle
Removable unit type with super-precision, sealed, anti-fricti
on bearing unit.
Speed 1750 RPM
Wheel diameter 14"
Wheel thickness 1" to 1-1/2"
Hole diameter 5"
Table
Slides on V and one flat way (has 3 t-slots).
Working surface 12" x 24"
T-slot width 9/16"
Feeds
Longitudinal (table)
Hydraulic, any desired rate from 10 to 125 FPM
Handwheel - range per revolution 1-1/2"
Maximum travel 28"
Cross (spindle slide upright), hydraulic
Amount at each reversal of power table travel,
any desired increment from .010" to .500"
Continuous transverse feed,
for wheel truing 10/min
for rapid transverse wheel positioning 75/min
Handwheel - graduated to read to .0002"
Fine feed knob (optional) - graduated to read to .
0001"
Transverse movement, maximum 14"
(CONT.)
Vertical (wheel spindle slide)
Handwheel - graduated to read to .0002"
Range per revolution .050"
Fine feed knob - graduated to read to .0001"
Maximum vertical adjustment 19-1/4"
Rapid power positioning - rate 40/min
Hydraulic system
Capacity 23 gallons
Pump (B & S No. 511 - modified)
Pump motor 2 HP
Heat exchanger for oil, cooling fan motor 1/40 HP
Lubrication system
Automatic and filtered. Uses same reservoir as hydraulic sys
tem
NET weight 5,000 lbs.
Gross weight 5,650 lbs.
Overall dimensions - crated
Height 77"
Width & depth 95" x 80"

MOTOR SPECIFICATIONS

5 HP 3/60/230/460 Spindle drive motor
2 HP 3/60/230/460 Hydraulic motor
1/2 HP 115 volt Single phase fan motor
1/4 HP 3/60/230/460 Coolant pump motor
Page 3 of 3