GIDDINGS & LEWIS #230 UNIVERSAL PORTABLE DRILLING, TAPPING,

Column swivel 360 degrees
Headstock swivel 45 deg. up & 45 deg. down
Diameter of spindle 3"
Morse taper No. 5
Continuous spindle feed 15"
Maximum extension of spindle by resetting 24"
Range of speeds (18) 26 to 800 RPM
Range of spindle feeds (9) .004 to .026 IPR
Range of milling feeds (infinitely variable) 1.6 to 22 IPM
Rapid traverse to headstock and column units 80 IPM
Horizontal travel of column on runway 72"
Vertical travel of headstock on column 72"
Minimum distance, floor to center of spindle 32"
Maximum distance, floor to center of spindle 104"
Height of runway 12"
Width of runway over ways 36"
Width of column over ways 20"
Width and depth of ways on column (each) 3-1/2" x 3"
Overall dimensions 117" L x 68" D x 161" High
Approximate weight 21,000 lbs.

MOTOR SPECIFICATIONS

5 HP AC Spindle motor
1-1/2 HP Headstock feed motor
2 HP Column feed motor