Sold

EISENMANN 13,000 SFCM GAS FIRED STAINLESS STEEL INCINERATOR

MISC
Manufacturer:
EISENMANN CORP
Year:
1987
Stock #:
4384
EISENMANN 13,000 SFCM GAS FIRED STAINLESS STEEL INCINERATOR

Incinerator
Exhaust volume
Maximum 13,000 SCFM
Minimum 8,650 SCFM
Combustion temperature
Maximum 70 deg. F
Design 1325 deg. F
Exit temperature 500 deg. F
Pressure drop 14.0" W.C. (hot)
Burner capacity (installed) 7,000,000 Btu/Hr.
Skin temperature 160 deg. F @ Ambient Conditions
Insulation 9" thick
Overall dimensions (insulated) 360" L x 120" D x 126" High
Approximate weight (insulated) 30,000 lbs.
Booster Fan
Exhaust volume 13,000 SCFM
Inlet pressure 0" W.C. @ 70 deg. F
Outlet pressure 14.5" W.C. (hot)
Motor specifications 50 HP, 1725 RPM, 480 vac, 3 phase
Fan speed (maximum) 2700 RPM
Approximate weight 1,000 lbs.

Incinerator
Combustion chamber and housing of materials adequate to hand
le the specified
temperatures
Stainless steel preheaters
IRI-gas train with automatic re-set valves, pre-piped, pre-w
ired to terminal box
Eisenmann natural gas burner, I.R.I. and F.M. approved
Type K double thermocouples for combustion temperature contr
ol
Type K thermocouples for hi-limit shut-off
Type K thermocouples for inlet air temperature monitoring
Type K thermocouples for exhaust air temperature monitoring
Teflon mounting pads
Insulation, 1200 deg. F mineral wool nine (9) inches in thic
kness applied in three
layers with staggered joints and fully clad with .020"
deep corrigated
aluminum sheeting gasketed and caulked to be weather t
ight
Two types of air filters, filter house and pocket filter
NOTE Incinerators were used to oxidize VOC from paint lines. The unit has
less than 1 year
actual use and is in like new condition.

Loading...