8" X 60" GIDDINGS & LEWIS ENDOMATIC MODEL MC

Milling Heads
10 HP on each head
Spindle nose National standard no. 50
Speed range thru pick off gears 31 to 283 RPM
Maximum diameter milling
with 10" cutters 8"
with 8" cutters 6-1/4"
with 6" cutters 3-1/2"
Minimum component length
with 10" cutters 8-1/2"
with 8" cutters 6-1/2"
with 6" cutters 4-1/2"
Maximum metal removed - each end 3/8"
Slide stroke 9-3/4"
Fast traverse rate 100 IPM
Feed rate (infinitely variable) 0 to 100 IPM
Drilling Heads
3 HP on each end
Speed range thru pick off gears 377 to 1145 RPM
Quill stroke 3"
Feed stroke 2-3/4"
Head adjustment 3"
Fast traverse rate 100 IPM
Feed rate (infinitely variable) 0 to 100 IPM
Thrust at 60 PSI 3,140 lbs.
Minimum center drill diameter 1/4"
Maximum center drill diameter 3/4"
Maximum twist drill diameter - Cast iron 1-1/4"
Maximum twist drill diameter - Steel 3/4"
Spot facing & recessing, normal recommended diameter
2"
(CONT.)
Vises
Two 3-point hydraulically operated vises with ball screws and
nuts
Maximum diameter clamping 8"
Minimum diameter clamping 1/2"
Opening and closing speed 120 IPM
Hydraulics
2 Independent self contained units situated at rear of machin
e (one for each head
& vise unit)
Capacity 16 gallons
Coolant
Tank capacity 29 gallons
Overall dimensions, approximate 120" L x 60" W x 56" High
Approximate weight 8,000 lbs.

MOTOR SPECIFICATIONS

3 HP Hydraulic pump motor
1/8 HP Coolant pump motor