SHEFFIELD SCHAUDT CNC PLUNGEFORM 10

Maximum diameter 7"
Maximum distance between centers 15"
Wheel speed with 16" dia. wheel (2160 RPM) 9050 SFPM
Wheelhead Travel Ranges
Center of grind to center of dress 21-3/8" (Standard Model 10)
First depth 0 to 1.000"
Second depth 0 to 1.000"
Third depth 0 to 1.000"
Full depth 0 to 1.000"
Coarse depth 0 to 1.000"
Fine depth 0 to 1.000"
Infeed Rate Ranges
First rate 0.00002 to 1.00100 in./rev.
Second rate 0.00002 to 0.00100 in./rev.
Third rate 0.00002 to 0.00100 in./rev.
To size rate 0.00002 to 0.00100 in./rev.
Grind dwell 0.0 to 999 sec.
Coarse dress 0.001 to 0.150 in./min.
Fine dress 0.001 to 0.050 in./min.
Dress dwell 0 to 999 sec.
Grinding Wheel Speed
Grinding 500 to 1450 RPM
Dressing
Diamond dressing 569 to 1076
Dress arbor 1500 RPM
2500 to 3100 SF/M
762 to 945 SM/M
(CONT.)
Workhead Speed
Infinite adjustment 40 to 2000 RPM
Grinding Wheel Size
Maximum outside diameter 16"
Inside diameter 5"
Width 3.0"
Minimum diameter 11"
Dress Roll Size
Maximum outside diameter 3.50"
Inside diameter 2"
Maximum width 3.125"
Work Size Range
Maximum grind diameter 3"
Maximum form width 3"
Swing diameter 2"
Maximum grind cycles per dress 999
Grind air gap 0 to .1000"
Dress air gap 0.002" set

MOTOR SPECIFICATIONS

10 HP 3/60/230/460 Main drive motor
10 HP 3/60/208-230/460 Hydraulic pump motor
3 HP 3/60/208-230/460 Coolant pump motor
Page 3 of 3