EUBAMA MODEL S8.1 HY-GS ROTARY TRANSFER MACHINE WITH

Central lubrication
Chip conveyor
Large, protective bonnet, swivelable to left and right side, max. 80dBa
, with oil, mist
extractor attachment
Transparent protective bonnet
Flat cam
Ring cam
Hydraulic system S8.1 HY-GS for hydraulic advance, release of ring with
ejector,
hydraulic thread cutting attachment, vane pump (0-stroke) P=7,5 P
S, n=1500
min-1, oil production = 26L/min, with accululator, oil tank 125L
hold-up,
completely tubed and installed with 6 magnetic valves, 1 pressure
reducing valve,
1 current regulating valve and 3 twin interlacing connecting plat
es.
Unit installation with 10 straightening rollers, with support and rolle
r frame
Coil stand, with central quick adjustment, for inner diameter from 400-
650 mm, bearing
capacity 1000 kp.
(CONT.)
Hydraulic feeding attachment with jaw-chucking, feeding cylinder for ma
. 50 mm stroke
Electric loading attachment
Quadruple spindle support, special
Bearing for supporting bolts for mounting on spindle support 18.09.0402
for further radial
spindles instead of horizontal spindles
Support for 2 drilling spindle units and 1 tapping unit or drilling uni
t, 1 slotting unit and
1 tapping unit, with cam lever and mounting angles
Sawing unit for steel, with feeding lever, cam mounting, with gear driv
e and drive motor
model 80
Flat cam
Radial drilling spindle unit, model 43 with feeding lever and guard, wi
th
synchroflex-drive and drive motor model 63
Flat cam
Collet chuck type U
Mounting plates station 5a and 5b each 60 degrees inclined (special & w
ith special lever)
Mounting plate, adjustable station 3, 5, & 7 for radial drilling spindl
e units
Drilling spindle unit model 2 for station 4, with guiding plate, receiv
ing angle, feeding
lever and guard, with synchroflex-drive and drive motor model 71
Ring cam
Collet chuck type ES 20
Drilling unit right behind, station 9, with drilling spindle model 2, w
ith
synchroflex-drive and drive motor model 71
Ring cam
Collet chuck type ES 20
Drilling unit right in from station 2, with drilling spindle model 2, w
ith
synchroflex-drive and drive motor model 71
Ring cam
Collet chuck type ES 20
Pole changing motors
Page 3 of 4
(CONT.)
Threading unit GW 50A, with synchroflex-drive and drive motor with forc
ed ventilation
Leader - English pitch
Jakobs - Chuck
Mounting set for GW 50 A, for mounting on support B, model 22, horizont
al left behind,
station 11
Forming unit, left hand in front of the coil material, working with 2 t
angential tools,
additional guide between forming unit and receiving ring, guard,
synchroflex-drive and drive motor model 80
Ring cam
HM Guide bush (round material)
HSS Bush (round material)
Hydraulic swiveling device, stepless swiveling range 0-180 degrees, wit
h cam
Hydraulic ejector
Hydraulic loosening attachment for receiving ring
Component stop
Set transmission parts for machining material S5 303 (= 1.4305)
Clamping ring
Add on for heavy duty execution
Transmission set for hydraulic to electric for straightening rolls
Intermidiate flange Z39 to RAS16
Electro-mech. drill breakage control
Preset counter
Rotating guide bushing
SPC control GE
Hydraulic clamping station 11 vertical
Hydraulic ring calibrating stand
Page 4 of 4
(CONT.)
Polo filter system
Add on of PC electric
Fette thread rolling head #RAS16 M4-M16 complete with 1 set of holders
and 1 set of
thread rolls
Wagner thread cutting head type Z39 with 1 set of holders and 1 set of
chasers