CINCINNATI MODEL 215-156 HYPOWERMATIC RISE & FALL

Table
Working surface 15" x 99"
Size overall 15" x 107"
T-slots (three) size 11/16"
Distance between slots 5"
Range
Table travel 72"
Vertical adjustment of spindle carrier (power) 10"
Center of table to spindle carrier 11"
Face of spindle carrier to inside of outer support (brace in
place) 24-5/8"
Center of table to face of spindle
Maximum 10"
Minimum 7"
Top of table to centerline of spindle
Maximum 14"
Minimum 4"
Distance from floor to top of table 34"
Under side of overarm to centerline of spindle 6-19/64
"
Quill
Total adjustment 3"
Diameter of quill 7"
Spindle
Spindle nose No. 50 Std.
Diameter of nose 5-1/16"
Speeds, number 16
Standard range 75 to 3000 RPM
Table Feed
Inches per minute (infinite within range specified) 1 to 15
0
(CONT.)
Carrier Feed
Inches per minute (infinite within range specified) 1/2 to
75
Power Rapid Traverse
Table 300 IPM
Spindle carrier 75 IPM
Floor Space Required
Maximum length (hydraulic door open) 182"
Maximum width (electrical door open) 99-3/4"
Maximum height 62-1/2"
Shipping Data
Shipping weight, domestic 15,700 lbs.
Size of case, export 174" x 86" x 79"

MOTOR SPECIFICATIONS

15 HP 3/60/220/440 Spindle drive motor
3 HP Feed drive motor (hydraulic unit)