15"X54" LEBLOND REGAL TOOLROOM PRECISION ENGINE LATHE

Capacity
Swing over bed and carriage wings 15-1/2"
Swing over cross slide 9-1/2"
Distance between centers, optional length 54"
Size of tool 1/2"x1-1/8"
Headstock
Spindle speeds, number 12
Standard spindle speed range, RPM (standard) 45 to 1800
Gear drive 45,69,95,132,179,256, 351 and 494
_ Belt drive 654,937,1282 and 1800
Spindle bearing diameter
Front 3-11/32"
Center 3"
Rear 2-3/4"
Spindle, size of hole, straight 2-17/64"
Spindle, size of hole, taper, amer.Std.No. 250
Spindle, size of center, Morse taper No. 4
Spindle nose, taper key drive, standard, size L-1
Spindle nose, diameter large end of taper 4-1/8"
Headstock length on bed 15-7/8"
Bed
Length, standard 5'6-1/4"
Width 12-3/16"
Depth 10-1/4"
Carriage
Length on bed 19-7/8"
Bearing surface 67-1/2 sq.in.
Bridge width 6-1/4"
Cross slide travel with taper attachment 7-7/8"
Compound rest travel 3-7/8"
15"X54" LEBLOND REGAL TOOLROOM PRECISION ENGINE LATHE

(CONT.)
Feeds-Threads Inch/Metric capabilities
Feed changes, gear or belt drive 48 - 40
Feed range .0018 IPR to.104 IPR
/.05mm/r to2.6mm/r
Thread changes, gear drive only 48 / 16* mm
Threads* 12 to 112TPI* / .25
to 12mm pitch*
Leadscrew diameter 1-3/16"
Tailstock
Spindle diameter 1-15/16"
Center, morse No. 4
Spindle travel and set over right or left 5", 1"
Length on bed 10-3/4"

MOTOR SPECIFICATIONS

7-1/2 HP Main drive motor 1800RPM 3/60/460V