MIYANO MODEL ABX-64TH2 10-AXIS TWIN SPINDLE 3 TURRET PRECISION TURNING CENTER LATHE

Bar Work:
Round Collet Capacity Left & Right Spindles 2.5"
Chuck Work:
Chuck Size Left & Right Spindle 6"
Work Length:
Max. Turning Length Left & Right Spindles 5"
Machining Capacity:
Max. Turning Diameter Left & Right Spindles 6.65"
Max. Turning Length 5.0"
Swing Diameter of Turret (upper Left, Right, Lower) 20.8"
Left Spindle:
Collet Capacity 2.5"
Spindle speed range (infinitely variable) 40 to 4,000 RPM
Variable speed steps direct drive
Spindle drive motor (30 minutes rating) AC 20 HP
Motor Type AC Type
Spindle Nose A2-6
Right Spindle:
Collet Capacity 2.0"
Spindle speed range (infinitely variable) 50 to 5,000 RPM
Spindle drive motor (variable speed) Max. rating AC 10 HP
Slide movements (Z3-axis) NC Control
Slide stroke (Z3-axis) 25.59"
Rapid traverse rate (Z3-axis) 1181 IPM
Thrust force (Z3-axis0 1,022 Lbs
Type of Slide Linear guide
Upper Turret Left:
Number of tool stations 12
Slant bed 45 Deg.
Max.Slide Stroke (X1-axis & Z1-axis) 7.48"/11.81"
Max. Slide Stroke (Y1-axis0 +/-1.57"
Rapid traverse (X1/Z1/Y1 Axes) 630/787/472 IPM
Turret indexing time 0.25 sec/pos.
Turret indexing type Bi-directional
Thrust force (X1,Z1,Y1) 1,700/1,278/1,700 lbs
Slide type Box way
Continue on Page 2
Upper Turret Right:
Slant bed 45 Degrees
Max. Slide stroke (X3 & Z3 Axes) 7.48"/25.59"
Max. Slide stroke (Y3-Axis) +/-1.57"
Rapid traverse rate (X3,Z3,Y3 Axes) 630/1181/472 IPM
Turret indexing time 0.25 Sec/pos
Thrust force (X3,Z3,Y3) 1,700/1,022/1,700 lbs.
Lower Turret:
Max. slide stroke (X2,Z2 Axes) 7.48"/19.6"
Rapid traverse rate (X2,Z2 Axes) 630/787 IPM
Turret indexing time 0.250 Sec/pos
Thrust force (X2,Z2) 1,700/1,278 Lbs.
Parts Catcher:
Max. part diameter 2.0"
Max. part length 5.0"
Revolving Tool Attachment Turrets:
Number of positions (upper left &upper right & lower Turret) 36
Drive motor max. rating (upper turret) AC 3.4 HP
Speed range (infinitely variable) 40-4,000 RPM
Revolving tool axis X & Z
Max. drill diameter capacity 1/2"
Max. tapping capacity 5/16"-18 UN
C-Axis Spindle Control (Left & Right):
Spindle position 360 Degrees
Minimum command increment 0.001 Degree
Positioning system (built in motor) C-axis control
Simultaneous 2-Axis Movement X-C or Z-C
C-Axis repeatability +/-0.017 Degree
C-Axis positioning accuracy +/-0.2 Degree
Rapid feed rate 33 RPM
Chuck Option:
Chuck diameter (main & sub spindle) 6"
Type Hydraulic
Max. speed 4,000 RPM
Concentricity total indicator reading 0.0005"
Turret Tooling:
Cutting tool size (both upper & lower turret) 3/4" sq.
Tool holder diameter (both upper &lower turret) 1"
General:
Lubrication 1 gallon
Hydraulic tank capacity 2.6 gallon
Coolant tank capacity 52.8 gallon
Machine dimensions 131.3"x84.1"x77.2"H
Length (including goose neck chip conveyor) 159.7"
Machine weight 21.164 lbs