FPZ MODEL SCL K11 MS BLOWER VACUUM PUMP NEW 2019

Technical Characteristics

– Aluminum alloy construction
– Smooth operation
– Maintenance free

Electric Motor
– Motors with IP 55 protection rating.
– class F insulation, suitable for operating with
inverter (refer to FPZ)
– Thermal Protector (PTO) as standard
Options Supply voltage - IE2 only at 50 Hz - Tolerance on the
fixed voltage value ± 10%, in range ± 5%.
– Special voltages (IEC 60038)
– Surface treatments
– Increased seal version
Perfomance Table

Pn [kW] Frequency [Hz] Δpmax
[mbar]
Qmax [m3/h] Leq1 [dB(A)] Weight [kg] H3
[mm] Current Consumption (Y/Δ)
[A] Cosφ
[-] Speed [rpm]
Suction Compression IE22 Range
7.5 50 175 175 915 80 90.5 460 9.06 / 15.7 9.18-9.47 / 15.9-16.4 0.78 2940
9 60 150 130 1105 82 90.5 460 8.86 / 15.34 9.87-9.00 / 17.1-15.6 0.83 3530
9.2 50 250 230 915 80 95.5 500 10.3 / 17.8 11.1-10.6 / 19.2-18.3 0.83 2940
11 60 200 175 1105 82 95.5 500 10.3 / 17.9 11.9-10.3 / 20.6-17.9 0.86 3530
11 50 300 300 915 80 102 500 12.53 / 21.7 13.0-12.9 / 22.6-22.3 0.81 2940
13 60 275 250 1105 82 102 500 12.2 / 21.2 13.8-12.4 / 23.9-21.4 0.84 3530
15 50 350 400 915 80 119 575 16.46 / 28.51 17.8-16.6 / 30.8-28.8 0.84 2940
17 60 325 350 1105 82 119 575 15.7 / 27.2 18.1-15.6 / 31.3-27.1 0.86 3540
18.5 50 - 450 915 80 138.5 635 20.7 / 35.9 21.7-21.7 / 37.6-37.5 0.81 2950
22 60 - 450 1105 82 138.5 635 20.4 / 35.4 23.3-20.7 / 40.3-35.9 0.85 3550
1. Noise level measured at a distance of 1 m with ducted intake and delivery, in accordance with Standard ISO 3744.
2. IE2 only at 50 Hz.
3. See figure "dimensions" at following page.

Tolerance on indicated values ± 10%. Data subject to change without notice.
Curves referring to air at a temperature of 20 °C and atmospheric pressure of 1013 mbar (abs).

Dimensions

Configuration with a vertical silencer is only available with the CK accessory kit; for all assembly options refer to FPZ. NOT Binding
Dimensions in mm

a b c d d1 e f G I I1 I2 m n o p1 p2 q r r1 s t u v w x y z
542 603 332 91 - 540 508 G 4" 200 - - 13 300 350 596 305 25 204 25 5 M8 390 510 556 220 - 16

INSTALLATION
• For proper operation of the machine, it must be provided with a suction FILTER and a vacuum/pressure limiting VALVE.
• Other accessories are available on request.
• Permissible ambient and fluid temperature in suction from -15 °C to +40 °C.
• Read the instruction manual carefully before installing the machine.