ELUMATEC DG244/02 DOUBLE END MITRE SAW, 7.5 METER LENGTH

DG 244 Double mitre saw
Double mitre saws

Description
The reliable elumatec principle “Cutting from below”: Provides unhindered access to support table
A large saw blade diameter and optimal use of the saw blade offer an ideal cutting capacity for all cutting variations
Standard for elumatec: external dimension cuts at all angle positions. This means no length calculations are necessary when cutting profiles of different heights. This is a big advantage when cutting special angles
The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre cut. Consequently, many profiles can be cut without support blocks
Safety hoods

Equipped with saw blades as standard Pulsed coolant system

Cutting length
7,500 mm

Options

Voltage: 460 / 60 / 3

Auto Cycle Vert Air Clamp:E500

Vertical Pneumatic Clamp

Pn. Stop for Transom/ 1st Cut

Hydro-Pnufeed Kit

Extraction System Complete

Automatic Cut-off for E550

Blade: 550mm, 110 Tooth, TCT

C-6000 Coolant/ 5 Gal.

Work PieceSupport - Fixed

Controller
PC control E 555

Technical data

Minimum cutting length at 90° 375 mm Minimum cutting length tilted at 45° 375 mm

Pivoting range inwards, pneumatically, 90° - 45°
(manually up to 22.5° inwards and up to 140° outwards with digital display) Tilting range inwards, pneumatically, 90° - 45°
(intermediate angles manually adjustable with digital read-out display and turret stop)
For cutting range, see cutting diagram Saw blade diameter 550 mm
Saw blade speed 2,250 rpm
Power supply 3/460v 60 Hz Power output per motor 4 kW Compressed air supply 7 bar
Air consumption per working cycle 40 l without spraying, 64 l with spraying