Southwestern Industries Prototrak DPM RX3 CNC Bedmill, New 2019

Standard Features:
ProtoTRAK RMX CNC integrated into the machine at the factory
Solid ram moves along the column providing mass for heavy cuts
Generous Z-axis CNC travel
Strong and rigid
Efficient for any job: manual, 2-axis CNC or 3-axis CNC
Standard electronic head for programmable spindle speeds and tapping
Precision ground ballscrews installed in the table, saddle and column
Manual quill with integrated quill and ram encoders
Wide way surfaces are hardened and ground, slideways are Turcite® coated
Real handwheels so you can work manually

Table Size 50″ x 10″
T-Slots (Number x Width) 3 x .63″ x 2.48″
Travel (X, Y, Z Axis)* 31.5″ x 17″ x 25.5″ Note

Quill Diameter 3 15/16″
Maximum Quill Travel 5″
Spindle Taper 40 Taper
Spindle Speed Range RPM 40 - 600, 300 - 5000
Spindle Center to Column Face 20.5″
Head Swivel (side to side) +/- 90°
Quill Feeds per Revolution of Spindle 0.0015/0.003/0.006″
Spindle Motor HP 5 HP
Power Requirements 200-240V, 3P, 35A
Maximum Weight of Workpiece 1320 lbs
Height Of Table From Bottom Of Bed 36.75″
Max Spindle Nose To Table 25.81″
Min Height 87.5″
Max Height 100.5″
Width Of Machine Including Table 73.5″
Overall Length With Electric Door Closed 76.63″
Overall Length With Electrical Door Open 96.63″
Overall Width Inc Full Table Traverse 102.25″
Footprint Of Machine 24″ x 43.31″
Weight Net / Shipping Lbs. 4100 / 4400
Rapid Traverse X, Y, Z Mechanical Handwheels: 250 IPM on X, Y and Z
Electronic Handwheels: 400 IPM on X and Y, 250 IPM on Z
Coolant Reservoir Capacity 10 gallons
Drilling Max Capacity (diameter) 1″ dia.
Milling Max Capacity 5 inch³/min
Tapping Max Capacity 1 - 8