Biesse Rover A 1332 ATS Pod and Rail 4-axis CNC Router, New 2012

Working Field:
X - Axis: 3280mm (129.1")
Y - Axis: 1320mm (52")
Z - Axis: 170mm (7")
(6) ATS Panel Support Rails
Biesse's ATS (auto locating pods)
Panel Lift Supports for Loading & Unloading of Sheets
Multi Zone Working Areas
Front, Rear & Side Stops
17.7 HP HSD Electrospindle (HSKF63)
12 Position Rotary Tool Changer
BH 17L Boring Head w/ quick change system
(10) Vert. Spindles (7 in X & 3 in Y)
(3) Horz. Spindles (2 in X & 1 in Y)
Saw Blade Unit 120mm
Auto Lubrication
Remote Keyboard Controls
PC Driven XP600 Control
Windows XP Operating System
PC Computer w/19" Color Monitor
CD -ROM Reader
20 GB Hard Disk w/Keyboard & Mouse
Becker Vacuum Pump
B-Solid Software Included.

9070440 WORKING FIELDS
Working Field: X = 3.280 mm; Y = 1.320 mm; Z = 170 mm with H=48 mm modules
Axis Stroke: X = 3722 mm; Y = 1993 mm; Z = 324 mm

WORK TABLE

"ATS" (Advanced Table Setting), is a BIESSE is the most advanced table design that allow easy and fast table set-up without limitations in the positioning, orientation and interchangeability of the vacuum modules.
The "ATS" excels in versatility and flexibility featuring a wide range of standard and/or custom fixturing solutions
.


In the picture some of the available hold-down options not included

73006076 ATS PANEL SUPPORTS - L = 1280MM - 24 SLIDING BASES
The work area is composed of:
• 6 aluminum panel supports. The supports slide on hardened and ground linear guides by means of ball runners. The locking takes place on both the front and the back linear guide , by means of 2 pneumatic cylinders, and is controlled through a push-button placed in front of the panel support
• 1 metric scale along the "X" axis, for a correct positioning of the panel supports
• 6 metric scales along the "Y" axis, for a correct positioning of the panel locking devices
• 24 sliding bases with dimensions 132 x 132 x H 41.5 mm with independent pneumatic locking . Each base is prearranged for the installation of locking modules for pieces with different shapes and dimensions , and allows to rotate the vacuum modules by 15° , ideal solution for shaped panels
• 24 shutters for the closure of the bases not provided with vacuum modules

7350428 6 rear reference stops with a stroke of 115 mm (Back Workstation)

7350717 6 rear reference stops with a stroke of 115 mm at 1190mm (front)
Reference stops are 22 mm diameter hardened steel to grant the maximum rigidity, and on the inside top part have a tread to assemble mushroom clamps (option) or the device to reference panels with overhanging lamination (option). Reference pins can also be supplied with sensors detecting the stop position (option).

7350190 4 Side stops with a stroke of 115 mm (2 Lh + 2 Rh)
The stops can be positioned manually along the Y axis.

7350205-7350237 4 Bar supports for modules H = 74 mm.
These supports, with automatic n.c. cutting out, facilitate the loading and unloading of heavy and/or big panels.
Each support can carry a weight of 36 kg (at 7 bar).
• Pneumatic system required

7350806 Division of the vacuum system in 2 work areas in X
Division of the pneumatic locking system in 2 work areas in X
The machine total work area in X is divided in 2 independent work areas.
The activation of one or both areas is controlled by the N.C., in relation to the maximum X dimension of the active program.
Each work area can have Lh and Rh origins when removable central stops are present.
This division allows to have, on each sliding base, both the vacuum system, to be used with the vacuum modules, and the compressed air system, to be used with pneumatic locking modules such as Uniclamp modules or pushers.
* The code includes nr. 2 pedals, each activating one working area.

7350055 Auxiliary Vacuum System for custom fixtures
Auxiliary vacuum system for the use of custom fixtures through a specific machine cycle.
The system includes 8 quick connects vacuum ports on the machine base (4 on the LH area and 4 on the RH area).

7300971-7300918 (2) 300 m3/h vacuum pump
Rotary Vanes, Oil-free 300 m3/h at 60 Hz (176.5 cfm)

WORK UNITS

A= 3280mm (129”); B=1525mm (60”); F (full pendulum) = 875mm (34.44”)

7212116 13.2 kW (17.7 HP) ELECTROSPINDLE WITH HSK F63 ADAPTOR AND AIR COOLING
The innovative 13.2 kW (17.7 HP) Electrospindle, HSK-F63 adaptor, air cooled on the Rover machines is manufactured by HSD (High Speed Development), a Biesse Group company.
Benefits for the customer of the HSD technology:
• INCREASED PRODUCTIVITY with:
- Programmable rotation speeds from 1,000 to 24,000 rpm
- 13.2 kW (17.7 HP)/12,000 to 15,000 rpm in S6 duty
- Efficient cooling system.
• PRECISION AND QUALITY MACHINING
- The electrospindles on the Rover machining centers are attached directly at Z-axis carriage and extremely close to the Y-axis beam. This solution guarantees superior rigidity and is completely unaffected by the thermal expansions always present when the electrospindles are attached to the boring block effecting precision.
- Pneumatic stroke is on a prismatic linear guide for maximum strength and precision
• HIGH PERFORMANCES AND FLEXIBILITY with
- RH and LH programmable rotation
- Dust hood has 6 pos., CNC adjusted for optimum dust collection in any working conditions.
- Dust gates to redirect or close dust collection when not in use
• REDUCED MAINTANANCE with
- Cartridge construction which allow for easy core replacement.
- Ceramic bearings, which are less susceptible to thermal elasticity than steel bearings, thus providing increased life

7291163 REVOLVER TOOLCHANGER 16 POSITIONS, POSITIONED ON THE X AXIS CARRIAGE
Onboard of the X axis carriage, allows to store up to 16 tools always available on each position of the machine and to perform tool changing operations in a short time.
Technical specifications:
• Wheelbase between grippers: 114mm
• Maximum loadable tools: 16 with 110mm maximum diameter
• Loadable aggregates: Refer to the toolchanger layout
• Maximum tool diameter: Refer to the toolchanger layout
• Maximum tool length: Refer to the toolchanger layout
• Maximum weight of a tool or aggregate inclusive of the tool: 7.5Kg
• Maximum total weight: 55Kg

7200064 BORING HEAD BH 17 L
Working unit which can be equipped with up to 17 independent tools for single and multiple borings on 5 panel sides, and equipped with a saw blade for grooves in X direction on the panel top.
The spindles have an alternate Rh/Lh rotation and move by means of precision ground helical teeth which grant maximum operating accuracy and silence.
The head is composed of:
• 10 independent vertical spindles at a centerdistance of 32 mm, 7 of which are placed along X and 3 along Y;
• 3 independent horizontal spindles with double outlet at a centerdistance of 32 mm, 2 of which are placed along X and 1 along Y;
• 1 saw blade unit for grooves along X (dia. 120 mm, max. cutting depth 25 mm);
The spindles are driven by 1 motor controlled by inverter (motor power 1.7 kW at 2800 rpm - 3 kW at 6000 rpm): the spindle rotation speed can be adjusted up to 6000 rpm, to perform quick boring cycles and therefore reduce the working time. In addition, it is possible to choose the rotation speed according to the tools employed and the material type.
* Requires the additional Z carriage on machines with 2 independent Z axes

7212079 ADDITIONAL, INDEPENDENT Z-AXIS CARRIAGE FOR FRONT OPERATING UNITS
The Boring Block is assembled on an independent Z-axes allowing for faster change from routing to boring and vice versa.

7530075 Upgrade to BiesseWorks Advanced (machine version).

7530074 BIESSEWORKS Advanced

ELECTRICAL CABINET
The machine can be powered at 380/400/415 V - 50/60 Hz.
The electric cabinet and the inner components comply with the CEI EN 60204-1 and CEI EN 60439-1 norms.
The auxiliary transformer supplies the connection voltage for the personal computer, the air conditioner and the electrospindles cooling fans, avoiding the use of the middle neutral wire, not always available.
The electronic equipment is powered by a stabilized 24 V DC power supplier.

49720 Autotransformer for voltage different from 380 V/50 Hz.

AIR CONDITIONER FOR ELECTRIC CABINET
It allows:
• the perfect working of all the electronic components included in the electric cabinet, even at very high temperatures, up to 40°C (104°F);
• a dust-free environment, since there are no aeration fans.

SAFETY DEVICES
NON CE safety devices with low fencing
Includes:
• 1 front safety mat equipped with control unit providing internal safety – for a machine with 1 single working area
• 2 front safety mats equipped with control unit providing internal safety – for a machine with 2 working areas
• Software device to protect the operator
• Emergency rope placed in front of the machine
• Operating unit cover, made of structural and protective plates, 20 layers of overlapping plastic strips (for a total thickness of 15 mm), and a transparent panel in crushproof polycarbonate allowing operators to work in total safety since it grants maximum visibility.
• Emergency button positioned on the N.C.
• Emergency button positioned on the PC console.
• The remote control panel includes commands to operate the machine fulfilling security requirements (emergency button, tool unlocking and feed speed adjustment ...).
• Security fence: Height 1.2 m

POWER SUPPLY: 380/400/415 V - 50/60 Hz.

MACHINE STATUS
LED lights on the front hood cover provide the operation with identification of the machine status.