OKUMA MULTUS B200II-W MULTI AXIS CNC MILL TURN CENTER NEW 2016
Have one to sell?
1 available
OKUMA MULTUS B200II-W MULTI AXIS CNC MILL TURN CENTER NEW 2016
MULTUS B200II-W r OKUMA
The MULTUS B200II has a 225� B-axis range with 12,000 rpm H1-milling spindle (opt. 20,000 rpm) with dual function (L/M). The H-1 dual function spindle head utilizes CAPTO-C6 tooling and has a 16.2/10.8 hp PREX milling motor spindle. The base offering has 40-tool ATC, with a 60-tool ATC available. The H1-turret has a 0.001-degree B-axis and compound-motion Y-axis for machining flexibility. The main spindle is equipped with a full-contouring C-axis.
Thermo-Friendly Construction assures high accuracy, even in the most complex applications, and the optional W version with sub-spindle allows a part to be handed from one spindle to the other. The MULTUS B200II is equipped with our OSP-P300 control that is designed with ease of operation in mind. With single-mode operation and superior graphics, novice operators as well as professional machinists will experience a smoother, more effective way of producing parts.
MAXIMUM SWING 23.62" MAXIMUM TURNING DIAMETER 17.72" MAX. DISTANCE BETWEEN SPINDLES 29.53" X AXIS TRAVEL 19.69" Z AXIS TRAVEL 31.5" Y AXIS TRAVEL � 3.15" C AXIS MINIMUM INCREMENT 0.001� B AXIS TRAVEL (ANGLE MILLING) -30� TO +195� RAPID TRAVERSE RATE X & Z AXES 1575 IPM RAPID TRAVERSE RATE Y AXIS 1024 IPM RAPID TRAVERSE RATE W AXIS 787 IPM SPINDLE NOSE (MAIN & SUB SPINDLE) A2-6 SPINDLE BORE (EITHER SPINDLE) 2.44" SPINDLE SPEEDS (LEFT SPINDLE) 45 - 5,000 RPM SPINDLE SPEEDS (RIGHT SPINDLE) 45 - 5,000 RPM SPINDLE MOTOR (MAIN / SUB SPINDLE) 30 HP / 20 HP TOOL CHANGER CAPACITY 40 STATIONS MILLING TOOLING SPEEDS 50 � 12,000 RPM MILLING MOTOR 10 HP APPROX. DIMENSIONS (INCL CHIP) 154" x 87" x 102" MACHINE WEIGHT (APPROX) 17,600 LBS
OKUMA Intelligent Murtitasking Mode/ MUL TUS 8200H (W) with OSP-P300S CNC Controller (15 inch OSP suite) Including CE mark
European Standard Specification
Main spindle motor PREX 1i/7.51KW (20 min./cont)
Main spindle speed, 50 - 6,000 min-1, (Auto two-shift:, PREX} Main spindle i 40flat, bore dia. 62mm
C-axis control, 360 degree at O.OOi degree increment
No chuck & no tube for Main-Spindle
Hollow cylinder SR1146 for main spindle, not inc!. draw tube Y-axis stroke 160mm (+80mm - -80mm)
Hi ATC tu1Tet HSK-A63
Ma){ too! weight 4kg Max tool length: 200mm (from gauge line)
20-too/ATC
Rotary toot drive motor, VAC 12/ 8 kW ( 5 min./cont) Rotary tool spindle speed. 50 - 12,000 min-�!
Sub spindle motor PREX11,7.5KW{20rnin./cont.)
Sub spindle speed, 50 - 6,000 min-1, (Auto two-shift, PREX) Sut, spindle 140f!at, bore dia. 62mm
No chuck & no tube for Sub-Spindle
Hollow cylinder SR i 146 for sub spindle, not incl. draw tube Chuck air blower for main + sub spindle
Hydraulic power unit
"Pre-arrangement for High pressure coolant unit 7MPa
� IMthrough spindle coolant pressure high/low switchable function (High/Low pressure pumps and filter unit will be arranged locally}"
Pump for Chip flusher and External M-spindle coolant:0.8kW(MTH2-50/5}
+Pumping pump:0.88kW(MTH4-40/3) Totally enclosed chip and coolant shield Door interlock
Work fight, LED, left and right each
Foundation washers and leveling jack screws Machine lifting hooks & hand tools
Chuck auto open I close with confirmation for main + sub spindle
M spindle through coolant supply spec. B-axis indexing, 0.001 degree indexing
Lubrication monitor A-1+ Hydraulic original Chip pan
Application for !EC standard Touch setter M
Double type chuck operation pedal CE mark and EMC
Dummy holder HSK-A63
OSP-P300S 30-M-E kit specifications
*Workpiece coordinate system selection 10 sets "'Coordinate conversion
*Profile generation
*Coordinate computation (including NYCL command)
*Coordinate change: silif,., rotate, copy
*Real 3D simulation
*Cycle time over check
"Load monitor (spindle, feed axis)
*NC operation monitor (incl. counter and totalization function)
*Signal tower 2 colours
*Spindle speed modulation control
*Cvcle Urne reduction function
*Hi-Cut Pro
Colour 15" touch display
Thermo-Friendly Concept (H1 TAS-S and TAS-C)
Collision Avoidance System
Tool compensation* lmplemerited as "simple operations" functions Workpiece jump out detection
Electrical Power Source Application to suite local power source at each countries
SEE PHOTOS FOR OPTIONS ORDERED WITH THIS MACHINE
We use cookies to improve your experience. Privacy Policy.